View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Select language
1-Click Quote Request
Product
Ifm
TAD081
Request a Quote
Ifm TAD081
Temperature transmitter with drift detection. TAD050KLEM01-A-ZKG/US
On Request. Please send us an email to inquire the price and avaliability.
"ucnguBrctvdgcxgt0eqo"
Description
Hygienic design for the requirements of the food and beverage industry. Precise scalable analogue output and high precision over the whole temperature range. With diagnostic output for drift and fault monitoring. High process safety due to self-monitoring. Including free 5-point calibration certificate.
Technical parameters
| Number of inputs and outputs: | Number of digital outputs: 1; Number of analogue outputs: 1 |
| Measuring range: | -25...160 °C -13...320 °F |
| -25...160 °C: | -13...320 °F |
| Process connection: | threaded connection G 1 external thread Aseptoflex Vario |
| Installation length EL [mm]: | 50 |
| Special feature: | Gold-plated contacts |
| Measuring element: | 1 x Pt 1000 + 1 x NTC; (thermically coupled, with backup function (temperature measuring even if one element fails)) |
| Media: | liquids and gases |
| Pressure rating [bar]: | 50 |
| Minimum installation depth [mm]: | 25 |
| MAWP (for applications according to CRN) [bar]: | 50 |
| Operating voltage [V]: | 18...32 DC; ("supply class 2" to cULus) |
| Current consumption [mA]: | 6; (24 V) |
| Protection class: | III |
| Reverse polarity protection: | yes |
| Power-on delay time [s]: | 8 |
| Integrated watchdog: | yes |
| Number of inputs and outputs: | Number of digital outputs: 1; Number of analogue outputs: 1 |
| Total number of outputs: | 2 |
| Output signal: | switching signal; analogue signal; IO-Link; (configurable) |
| Electrical design: | PNP/NPN |
| Number of digital outputs: | 1 |
| Output function: | normally open / normally closed / diagnostic signal; (parameterisable) |
| Max. voltage drop switching output DC [V]: | 2 |
| Permanent current rating of switching output DC [mA]: | 150; (200 (...60°C); 250 (...40 °C)) |
| Diagnostic output: | diagnostic output for drift and fault monitoring |
| Number of analogue outputs: | 1 |
| Analogue current output [mA]: | 4...20 |
| Max. load [Ω]: | (Ub - 15 V) x 50 |
| Short-circuit protection: | yes |
| Type of short-circuit protection: | pulsed |
| Overload protection: | yes |
| Measuring range: | -25...160 °C -13...320 °F |
| -25...160 °C: | -13...320 °F |
| Note on measuring range: | scalable |
| Factory setting: | 0...150 °C / 32...302 °F |
| Drift warning: | 0.2...5 °C 0.4...9 °F |
| 0.2...5 °C: | 0.4...9 °F |
| Drift alarm: | 0.2...5 °C 0.4...9 °F |
| 0.2...5 °C: | 0.4...9 °F |
| In steps of: | 0.05 °C 0.1 °F |
| 0.05 °C: | 0.1 °F |
| Resolution of analogue output [K]: | 0.05 |
| Precision analogue output [K]: | ± 0,2 (-10...130°C); ± 0,3 (130...140°C); ± 0,3 ± 0,1% MS (-25...-10/140...160°C); (probe completely inserted into the measured medium up to the sealing chamfer) |
| Temperature coefficient [% of the span / 10 K]: | < ± 0,01; (in case of deviation from the reference condition 25 ± 5 °C) |
| Dynamic response T05 / T09 [s]: | 3 / 6 |
| Parameter setting options: | drift warning/drift alarm threshold; Fail-Safe; Display unit; scaling of the analogue output; redundancy switching; performance diagnostic output; switching logic; normally open / normally closed |
| Communication interface: | IO-Link |
| Transmission type: | COM1 (4,8 kBaud) |
| IO-Link revision: | 1.1 |
| SDCI standard: | IEC 61131-9 CDV |
| IO-Link device ID: | 323 d / 00 01 43 h |
| Profiles: | Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis |
| SIO mode: | yes |
| Required master port type: | A |
| Process data analogue: | 1 |
| Process data binary: | 1 |
| Min. process cycle time [ms]: | 18.8 |
| Ambient temperature [°C]: | -25...70 |
| Storage temperature [°C]: | -40...85 |
| Protection: | IP 68; IP 69K |
| EMC: | DIN EN 61000-6-2 DIN EN 61000-6-3 |
| Shock resistance: | DIN EN 68000-2-27 50 g (11 ms) |
| DIN EN 68000-2-27: | 50 g (11 ms) |
| Vibration resistance: | DIN EN 60068-2-6 20 g (10...2000 Hz) |
| DIN EN 60068-2-6: | 20 g (10...2000 Hz) |
| MTTF [years]: | 213 |
| Note on approval: | Including free 5-point calibration certificate. |
| Weight [K40]: | 402.5 |
| Materials: | stainless steel (1.4435 / 316L); stainless steel (1.4404 / 316L); PEI; FKM |
| Materials (wetted parts): | stainless steel (1.4435 / 316L); stainless steel (1.4404 / 316L) |
| Process connection: | threaded connection G 1 external thread Aseptoflex Vario |
| Surface characteristics Ra/Rz of the wetted parts: | Ra: < 0.6 |
| Installation length EL [mm]: | 50 |
| Remarks: | MS = set measuring span |
| Pack quantity: | 1 pcs. |
| Connection: | Connector: 1 x M12; Contacts: gold-plated |
Logistic parameters
| ECCN: | |
| Country of Origin: | US |
| EAN: | |
| Weight: | 0.40 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |