View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Select language
1-Click Quote Request
Product
Ifm
SU8001
Request a Quote
Ifm SU8001
Ultrasonic flow meter. SUR11HGBFRKG/W/US-100-IPF
On Request. Please send us an email to inquire the price and avaliability.
"ucnguBrctvdgcxgt0eqo"
Description
Precise measurement of flow, consumption and medium temperature. Suitable for water, oils and glycol solutions. For installation in pipes. With switching output, analogue output and pulse output. Clearly visible 4-digit LED display
Technical parameters
| Number of inputs and outputs: | Number of digital outputs: 2; Number of analogue outputs: 1 |
| Process connection: | threaded connection G 1 flat seal |
| Measuring range [°F]: | 14...176 |
| Special feature: | Gold-plated contacts |
| Application: | totaliser function; for industrial applications |
| Installation: | connection to pipe by means of an adapter |
| Media: | water; glycol solutions; coolants; oil |
| Note on media: | low-viscosity oils with viscosity: 7...40 mm²/s (40 °C) high-viscosity oils with viscosity: 30...68 mm²/s (40 °C) |
| Medium temperature [°F]: | 14...176 |
| Pressure rating [bar]: | 16 |
| Pressure rating [psi]: | 232 |
| Operating voltage [V]: | 19...30 DC; (according to EN 50178 SELV/PELV) |
| Current consumption [mA]: | 100 |
| Min. insulation resistance [MΩ]: | 100; (500 V DC) |
| Protection class: | III |
| Reverse polarity protection: | yes |
| Power-on delay time [s]: | 10 |
| Number of inputs and outputs: | Number of digital outputs: 2; Number of analogue outputs: 1 |
| Inputs: | counter reset |
| Total number of outputs: | 2 |
| Output signal: | switching signal; analogue signal; pulse signal; (configurable) |
| Electrical design: | PNP/NPN |
| Number of digital outputs: | 2 |
| Output function: | normally open / normally closed; (parameterisable) |
| Max. voltage drop switching output DC [V]: | 2 |
| Permanent current rating of switching output DC [mA]: | 250; (per output) |
| Number of analogue outputs: | 1 |
| Analogue current output [mA]: | 4...20; (scalable) |
| Max. load [Ω]: | 500 |
| Analogue voltage output [V]: | 0...10; (scalable) |
| Min. load resistance [Ω]: | 2000 |
| Pulse output: | flow rate meter |
| Short-circuit protection: | yes |
| Type of short-circuit protection: | pulsed |
| Overload protection: | yes |
| Measuring range: | 0...1585 gph 0...26.44 gpm |
| 0...1585 gph: | 0...26.44 gpm |
| Display range: | 0...1902 gph 0...31.72 gpm |
| 0...1902 gph: | 0...31.72 gpm |
| Resolution: | 1 gph 0.02 gpm |
| 1 gph: | 0.02 gpm |
| Set point SP: | 4...1585 gph 0.06...26.44 gpm |
| 4...1585 gph: | 0.06...26.44 gpm |
| Reset point rP: | 0...1581 gph 0...26.38 gpm |
| 0...1581 gph: | 0...26.38 gpm |
| Analogue start point ASP: | 0...1285 gph 0...21.44 gpm |
| 0...1285 gph: | 0...21.44 gpm |
| Analogue end point AEP: | 300...1585 gph 5...26.44 gpm |
| 300...1585 gph: | 5...26.44 gpm |
| Max. flow rate: | 1902 gph 31.7 gpm |
| 1902 gph: | 31.7 gpm |
| In steps of: | 1 gph 0.02 gpm |
| 1 gph: | 0.02 gpm |
| Pulse value: | 0.02...9000 * 10³ gal |
| In steps of: | 0.02 gal |
| Pulse length [s]: | 0,3...2 |
| Measuring range [°F]: | 14...176 |
| Resolution [°F]: | 0.5 |
| Set point SP [°F]: | 14.5...176 |
| Reset point rP [°F]: | 14...175.5 |
| Analogue start point [°F]: | 14...145.5 |
| Analogue end point [°F]: | 44.5...176 |
| In steps of [°F]: | 0.5 |
| Accuracy (in the measuring range): | < ± (3 % MW + 0,2 % MEW) / < ± (5 % MW + 0,5 % MEW); (water; glycol: 35%; oil: viscosity 68 mm²/s at 40 °C) |
| Repeatability: | 0,05 gpm; 3 gph |
| Accuracy [K]: | ± 5,4 (Q > 0,26 gpm) |
| Response time [s]: | 0.25; (dAP = 0) |
| Delay time programmable dS, dr [s]: | 0...50 |
| Damping for the switching output dAP [s]: | 0...1 |
| Dynamic response T05 / T09 [s]: | T09 = 70 (Q > 1 gpm); (water) |
| Parameter setting options: | Flow monitoring; quantity meter; Preset counter; Temperature monitoring |
| Ambient temperature [°F]: | 14...140 |
| Storage temperature [°F]: | -13...176 |
| Protection: | IP 67 |
| EMC: | EN 61000-4-2 ESD 4 kV CD / 8 kV AD EN 61000-4-3 HF radiated 10 V/m EN 61000-4-4 Burst 2 kV EN 61000-4-5 Surge 0,5 kV EN 61000-4-6 HF conducted 10 V |
| EN 61000-4-2 ESD: | 4 kV CD / 8 kV AD |
| EN 61000-4-3 HF radiated: | 10 V/m |
| EN 61000-4-4 Burst: | 2 kV |
| EN 61000-4-5 Surge: | 0,5 kV |
| EN 61000-4-6 HF conducted: | 10 V |
| Shock resistance: | DIN IEC 68-2-27 20 g (11 ms) |
| DIN IEC 68-2-27: | 20 g (11 ms) |
| Vibration resistance: | DIN IEC 68-2-6 5 g (10...2000 Hz) |
| DIN IEC 68-2-6: | 5 g (10...2000 Hz) |
| MTTF [years]: | 185 |
| Pressure Equipment Directive: | Sound engineering practice; can be used for group 2 fluids; group 1 fluids on request |
| Weight [g]: | 1666.5 |
| Materials: | housing: AlMgSi0,5 anodised; Sealing: FKM; connector housing: brass Optalloy-plated; PA 6.6; cover film: PA |
| Materials (wetted parts): | stainless steel (1.4404 / 316L); FKM; PES; Centellen 200 |
| Process connection: | threaded connection G 1 flat seal |
| Display: | Display unit 5 x LED, green (gpm, gph, gal, °F, 10³) switching status 2 x LED, yellow measured values alphanumeric display, 4-digit programming alphanumeric display, 4-digit |
| Display unit: | 5 x LED, green (gpm, gph, gal, °F, 10³) |
| switching status: | 2 x LED, yellow |
| measured values: | alphanumeric display, 4-digit |
| programming: | alphanumeric display, 4-digit |
| Accessories (supplied): | sealings: 2, Centellen |
| Accessories (optional): | adapter for pipe: 1 x 1/2" NPT, stainless steel, E40192 adapter for pipe: 1 x 3/4" NPT, stainless steel, E40193 adapter for pipe: 1 x 1/2" NPT, brass, E40155 adapter for pipe: 1 x 3/4" NPT, brass, E40156 |
| Remarks: | MW = measured value MEW = Final value of the measuring range sealing: only with supplied Centellen seals |
| Pack quantity: | 1 pcs. |
| Connection: | Connector: 1 x M12; Moulded body: brass, Optalloy-plated; Contacts: gold-plated |
Logistic parameters
| ECCN: | |
| Country of Origin: | DE |
| EAN: | |
| Weight: | 1.67 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |