View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Select language
1-Click Quote Request
Product
Ifm
SM6420
Request a Quote
Ifm SM6420
Magnetic-inductive flow meter. SMK12XGXFRKG/US-100
On Request. Please send us an email to inquire the price and avaliability.
"ucnguBrctvdgcxgt0eqo"
Description
Precise measurement of flow, consumption and medium temperature. High accuracy, repeatability and measurement dynamics. With switching output, analogue output and pulse output. Clearly readable colour display with red/green colour change. No inlet and output pipe lengths required
Technical parameters
| Number of inputs and outputs: | Number of digital outputs: 2; Number of analogue outputs: 1 |
| Measuring range [l/min]: | 0.05...35 |
| Display range [l/min]: | -42...42 |
| Process connection: | Rc 1/2 DN15 |
| Special feature: | Gold-plated contacts |
| Media: | conductive liquids; water; hydrous media |
| Note on media: | Leitfähigkeit: ≥ 20 µS/cm Viskosität: < 70 mm²/s (40 °C) |
| Medium temperature [°C]: | -20...90 |
| Pressure rating [bar]: | 16 |
| Pressure rating [Mpa]: | 1.6 |
| Operating voltage [V]: | 18...30 DC; (nach EN 50178, SELV, PELV) |
| Current consumption [mA]: | < 80 |
| Protection class: | III |
| Reverse polarity protection: | yes |
| Power-on delay time [s]: | 5 |
| Number of inputs and outputs: | Number of digital outputs: 2; Number of analogue outputs: 1 |
| Inputs: | counter reset |
| Total number of outputs: | 2 |
| Output signal: | switching signal; analogue signal; pulse signal; IO-Link; frequency signal; (configurable) |
| Electrical design: | PNP/NPN |
| Number of digital outputs: | 2 |
| Output function: | normally open / normally closed; (parameterisable) |
| Max. voltage drop switching output DC [V]: | 2 |
| Permanent current rating of switching output DC [mA]: | 100 |
| Number of analogue outputs: | 1 |
| Analogue current output [mA]: | 4...20; (scalable) |
| Max. load [Ω]: | 500 |
| Pulse output: | flow rate meter |
| Short-circuit protection: | yes |
| Type of short-circuit protection: | pulsed |
| Overload protection: | yes |
| Measuring range [l/min]: | 0.05...35 |
| Display range [l/min]: | -42...42 |
| Resolution [l/min]: | 0.02 |
| Set point SP [l/min]: | 0.25...35 |
| Reset point rP [l/min]: | 0...34.8 |
| Analogue start point ASP [l/min]: | 0...28 |
| Analogue end point AEP [l/min]: | 7...35 |
| Low flow cut-off LFC [l/min]: | 0.05...1.75 |
| Frequency end point, FEP [l/min]: | 7...35 |
| Frequency at the end point FRP [Hz]: | 1...10000 |
| Pulse length [s]: | 0.001...2 |
| Pulse value: | 0.001...99990000 I |
| Measuring range [°C]: | -20...90 |
| Display range [°C]: | -42...112 |
| Resolution [°C]: | 0.1 |
| Set point SP [°C]: | -19.6...90 |
| Reset point rP [°C]: | -20...89.6 |
| Analogue start point [°C]: | -20...68 |
| Analogue end point [°C]: | 2...90 |
| In steps of [°C]: | 0.1 |
| Accuracy (in the measuring range): | ± (0,8 % MW + 0,2 % MEW) |
| Repeatability: | ± 0,2 % MEW |
| Accuracy [K]: | ± 2,5 (Q > 5 % MEW) |
| Start-up delay [s]: | 0...50 |
| Response time [s]: | < 0.25; (dAP = 0, T09) |
| Damping for the switching output dAP [s]: | 0...5 |
| Response time [s]: | 15; (Q > 10 % MEW, T09) |
| Parameter setting options: | hysteresis / window; normally open / normally closed; switching logic; frequency output; current/pulse output; start-up delay; display can be deactivated; Display unit |
| Communication interface: | IO-Link |
| Transmission type: | COM2 (38,4 kBaud) |
| IO-Link revision: | 1.1 |
| SDCI standard: | IEC 61131-9 |
| IO-Link device ID: | 954 d / 00 03 ba h |
| Profiles: | Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis |
| SIO mode: | yes |
| Required master port type: | A |
| Process data analogue: | 3 |
| Process data binary: | 2 |
| Min. process cycle time [ms]: | 6 |
| Ambient temperature [°C]: | -20...60 |
| Storage temperature [°C]: | -25...80 |
| Protection: | IP 65; IP 67 |
| EMC: | DIN EN 60947-5-9 |
| Shock resistance: | DIN IEC 68-2-27 20 g (11 ms) |
| DIN IEC 68-2-27: | 20 g (11 ms) |
| Vibration resistance: | DIN IEC 68-2-6: 5 g (10...2000 Hz) |
| DIN IEC 68-2-6:: | 5 g (10...2000 Hz) |
| MTTF [years]: | 114 |
| UL approval: | UL Approval no. I014 File number UL E174189 |
| UL Approval no.: | I014 |
| File number UL: | E174189 |
| Pressure Equipment Directive: | Sound engineering practice; can be used for group 2 fluids; group 1 fluids on request |
| Weight [g]: | 733.6 |
| Materials: | stainless steel (1.4408/316); stainless steel (1.4404 / 316L); PC; PBT+PC-GF30 |
| Materials (wetted parts): | stainless steel (1.4404 / 316L); PEEK; carbon fibre PEEK; FKM |
| Process connection: | Rc 1/2 DN15 |
| Display: | colour display 1,44", 128 x 128 pixels 2 x LED, yellow |
| Remarks: | MW = measured value MEW = Final value of the measuring range |
| Pack quantity: | 1 pcs. |
| Connection: | Connector: 1 x M12; Contacts: vergoldet |
Logistic parameters
| ECCN: | |
| Country of Origin: | DE |
| EAN: | |
| Weight: | 0.73 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |