View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Select language
1-Click Quote Request
Product
Ifm
SM0510
Request a Quote
Ifm SM0510
Magnetic-inductive flow meter. SMR21XGXFRKG/US
On Request. Please send us an email to inquire the price and avaliability.
"ucnguBrctvdgcxgt0eqo"
Description
Precise measurement of flow, consumption and medium temperature. High accuracy, repeatability and measurement dynamics. For use in water cooling circuits. With switching output, analogue output and pulse output. Clearly visible 4-digit LED display
Technical parameters
| Number of inputs and outputs: | Number of digital outputs: 2; Number of analogue outputs: 1 |
| Process connection: | threaded connection G 2 DN50 flat seal |
| Measuring range [°C]: | -20...80 |
| Special feature: | Gold-plated contacts |
| Application: | totaliser function; empty pipe detection; for industrial applications |
| Installation: | connection to pipe by means of an adapter |
| Media: | conductive liquids; water; hydrous media |
| Note on media: | conductivity: ≥ 20 µS/cm viscosity: < 70 mm²/s (40 °C) |
| Medium temperature [°C]: | -10...70 |
| Pressure rating [bar]: | 16 |
| Pressure rating [Mpa]: | 1.6 |
| Operating voltage [V]: | 18...32 DC; (according to EN 50178 SELV/PELV) |
| Current consumption [mA]: | < 150 |
| Protection class: | III |
| Reverse polarity protection: | yes |
| Power-on delay time [s]: | 5 |
| Number of inputs and outputs: | Number of digital outputs: 2; Number of analogue outputs: 1 |
| Inputs: | counter reset |
| Total number of outputs: | 2 |
| Output signal: | switching signal; analogue signal; pulse signal; frequency signal; IO-Link; (configurable) |
| Electrical design: | PNP/NPN |
| Number of digital outputs: | 2 |
| Output function: | normally open / normally closed; (parameterisable) |
| Max. voltage drop switching output DC [V]: | 2 |
| Permanent current rating of switching output DC [mA]: | 250; (per output) |
| Number of analogue outputs: | 1 |
| Analogue current output [mA]: | 4...20; (scalable) |
| Max. load [Ω]: | 500 |
| Analogue voltage output [V]: | 0...10; (scalable) |
| Min. load resistance [Ω]: | 2000 |
| Pulse output: | flow rate meter |
| Short-circuit protection: | yes |
| Type of short-circuit protection: | pulsed |
| Overload protection: | yes |
| Frequency of the output [Hz]: | 0.1...10000 |
| Measuring range: | 5...900 l/min 0.3...54 m³/h |
| 5...900 l/min: | 0.3...54 m³/h |
| Display range: | -920...920 l/min -55.2...55.2 m³/h |
| -920...920 l/min: | -55.2...55.2 m³/h |
| Resolution: | 1 l/min 0.05 m³/h |
| 1 l/min: | 0.05 m³/h |
| Set point SP: | 10...900 l/min 0.55...54 m³/h |
| 10...900 l/min: | 0.55...54 m³/h |
| Reset point rP: | 5...896 l/min 0.3...53.75 m³/h |
| 5...896 l/min: | 0.3...53.75 m³/h |
| Analogue start point ASP: | 0...720 l/min 0...43.2 m³/h |
| 0...720 l/min: | 0...43.2 m³/h |
| Analogue end point AEP: | 180...900 l/min 10.8...54 m³/h |
| 180...900 l/min: | 10.8...54 m³/h |
| Low flow cut-off LFC: | < 15 l/min < 0.9 m³/h |
| < 15 l/min: | < 0.9 m³/h |
| In steps of: | 1 l/min 0.05 m³/h |
| 1 l/min: | 0.05 m³/h |
| Measuring dynamics: | 1:180 |
| Pulse value: | 0.1 l...600 x 10³ m³ |
| In steps of: | 0.1 l |
| Pulse length [s]: | 0,003...2 |
| Measuring range [°C]: | -20...80 |
| Display range [°C]: | -40...100 |
| Resolution [°C]: | 0.2 |
| Set point SP [°C]: | -19.2...80 |
| Reset point rP [°C]: | -19.6...79.6 |
| Analogue start point [°C]: | -20...60 |
| Analogue end point [°C]: | 0...80 |
| In steps of [°C]: | 0.2 |
| Accuracy (in the measuring range): | ± (0,8 % MW + 0,5 % MEW) |
| Repeatability: | ± 0,2% MEW |
| Temperature drift: | ± 0,0333 °C / K |
| Accuracy [K]: | ± 1 (bei 25 °C, Q > 15 l/min) |
| Response time [s]: | 0.35; (dAP = 0) |
| Delay time programmable dS, dr [s]: | 0...50 |
| Damping for the switching output dAP [s]: | 0...5 |
| Dynamic response T05 / T09 [s]: | T09 = 3 (Q > 15 l/min) |
| Parameter setting options: | Flow monitoring; quantity meter; Preset counter; Temperature monitoring; hysteresis / window; normally open / normally closed; switching logic; current/voltage/frequency/pulse output; start-up delay; display can be deactivated; Display unit; empty pipe detection |
| Communication interface: | IO-Link |
| Transmission type: | COM2 (38,4 kBaud) |
| IO-Link revision: | 1.1 |
| SDCI standard: | IEC 61131-9 CDV |
| IO-Link device ID: | 509 d / 00 01 FD h |
| Profiles: | Smart Sensor: Process Data Variable; Device Identification |
| SIO mode: | yes |
| Required master port type: | A |
| Process data analogue: | 3 |
| Process data binary: | 2 |
| Min. process cycle time [ms]: | 5 |
| Ambient temperature [°C]: | -10...60 |
| Storage temperature [°C]: | -25...80 |
| Protection: | IP 65; IP 67 |
| EMC: | DIN EN 61000-4-2 ESD 4 kV CD / 8 kV AD DIN EN 61000-4-3 HF radiated 10 V/m DIN EN 61000-4-4 Burst 2 kV DIN EN 61000-4-5 Surge 1 kV DIN EN 61000-4-6 HF conducted 10 V |
| DIN EN 61000-4-2 ESD: | 4 kV CD / 8 kV AD |
| DIN EN 61000-4-3 HF radiated: | 10 V/m |
| DIN EN 61000-4-4 Burst: | 2 kV |
| DIN EN 61000-4-5 Surge: | 1 kV |
| DIN EN 61000-4-6 HF conducted: | 10 V |
| Shock resistance: | DIN EN 60068-2-27 20 g (11 ms) |
| DIN EN 60068-2-27: | 20 g (11 ms) |
| Vibration resistance: | DIN EN 60068-2-6 5 g (10...2000 Hz) |
| DIN EN 60068-2-6: | 5 g (10...2000 Hz) |
| MTTF [years]: | 77.9 |
| Pressure Equipment Directive: | Sound engineering practice; can be used for group 2 fluids; group 1 fluids on request |
| Weight [K40]: | 3212 |
| Materials: | stainless steel (1.4404 / 316L); stainless steel (1.4571/316Ti ); PC; FKM; PBT-GF20; TPE-U |
| Materials (wetted parts): | stainless steel (1.4404 / 316L); stainless steel (1.4571/316Ti ); PEEK; Centellen; FKM |
| Process connection: | threaded connection G 2 DN50 flat seal |
| Display: | Display unit 6 x LED, green (l/min, m³/h, l, m³, 10³, °C) switching status 2 x LED, yellow measured values alphanumeric display, 4-digit programming alphanumeric display, 4-digit |
| Display unit: | 6 x LED, green (l/min, m³/h, l, m³, 10³, °C) |
| switching status: | 2 x LED, yellow |
| measured values: | alphanumeric display, 4-digit |
| programming: | alphanumeric display, 4-digit |
| Accessories (supplied): | sealings: 2, Centellen Label |
| Remarks: | MW = measured value MEW = Final value of the measuring range |
| Pack quantity: | 1 pcs. |
| Connection: | Connector: 1 x M12; Contacts: gold-plated |
Logistic parameters
| ECCN: | |
| Country of Origin: | DE |
| EAN: | |
| Weight: | 3.21 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |