View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Select language
1-Click Quote Request
Product
Ifm
SD6050
Request a Quote
Ifm SD6050
Compressed air meter. SDR12DGXFPKG/US-100
On Request. Please send us an email to inquire the price and avaliability.
"ucnguBrctvdgcxgt0eqo"
Description
Precise measurement of flow, consumption and medium temperature. High accuracy, repeatability and measurement dynamics. For detecting compressed air in industrial use. With switching output, analogue output and pulse output. Clearly visible 4-digit LED display
Technical parameters
| Number of inputs and outputs: | Number of digital outputs: 2; Number of analogue outputs: 1 |
| Process connection: | threaded connection G 1/2 DN15 |
| Measuring range [°C]: | 0...60 |
| Application: | for industrial applications |
| Media: | compressed air |
| Medium temperature [°C]: | 0...60 |
| Pressure rating [bar]: | 16 |
| Pressure rating [Mpa]: | 1.6 |
| Operating voltage [V]: | 18...30 DC; (according to EN 50178 SELV/PELV) |
| Current consumption [mA]: | < 110 |
| Protection class: | III |
| Reverse polarity protection: | yes |
| Power-on delay time [s]: | 1 |
| Number of inputs and outputs: | Number of digital outputs: 2; Number of analogue outputs: 1 |
| Total number of outputs: | 2 |
| Output signal: | switching signal; analogue signal; pulse signal; IO-Link; (configurable) |
| Electrical design: | PNP |
| Number of digital outputs: | 2 |
| Output function: | normally open / normally closed; (parameterisable) |
| Max. voltage drop switching output DC [V]: | 2 |
| Permanent current rating of switching output DC [mA]: | 250; (per output) |
| Number of analogue outputs: | 1 |
| Analogue current output [mA]: | 4...20; (scalable) |
| Max. load [Ω]: | 500 |
| Pulse output: | consumed quantity meter |
| Short-circuit protection: | yes |
| Type of short-circuit protection: | pulsed |
| Overload protection: | yes |
| Measuring range: | 10...1250 l/min 0.3...103.6 m/s 0.2...75 m³/h |
| 10...1250 l/min: | 0.3...103.6 m/s |
| Display range: | 0...1500 l/min 0...124.3 m/s 0...90 m³/h |
| 0...1500 l/min: | 0...124.3 m/s |
| Set point SP: | 10...1250 l/min 0.8...103.6 m/s 0.6...75 m³/h |
| 10...1250 l/min: | 0.8...103.6 m/s |
| Reset point rP: | 4...1244 l/min 0.3...103.1 m/s 0.2...74.6 m³/h |
| 4...1244 l/min: | 0.3...103.1 m/s |
| Analogue start point ASP: | 0...938 l/min 0...77.7 m/s 0...56.3 m³/h |
| 0...938 l/min: | 0...77.7 m/s |
| Analogue end point AEP: | 312...1250 l/min 25.9...103.6 m/s 18.7...75 m³/h |
| 312...1250 l/min: | 25.9...103.6 m/s |
| In steps of: | 1 l/min 0.1 m/s 0.1 m³/h |
| 1 l/min: | 0.1 m/s |
| Pulse value: | 0.001...1000000 m³ |
| In steps of: | 0.001 m³ |
| Pulse length [s]: | 0,02...2 |
| Measuring range [°C]: | 0...60 |
| Display range [°C]: | -12...72 |
| Repeatability [% of the measured value]: | ± 1,5 |
| Accuracy (in the measuring range): | ± (15 % MW + 1,5 % MEW); (maximum value to be achieved for air quality class 344 (DIN 8573-1); when using pipes of tolerance class T3/T4; inlet and outlet pipe lengths without edges and abrupt diameter changes; inner surface of the pipe free of burrs) |
| Accuracy [K]: | ± 2; (medium flow in the limit area of the flow measurement range) |
| Response time [s]: | 0.1; (dAP = 0) |
| Damping for the switching output dAP in steps [s]: | 0 - 0,2 - 0,4 - 0,6 - 0,8 - 1 |
| Parameter setting options: | Flow monitoring; quantity meter; Preset counter; Temperature monitoring; hysteresis / window; normally open / normally closed; current/pulse output; display can be rotated and switched off; Display unit; totaliser |
| Communication interface: | IO-Link |
| Transmission type: | COM2 (38,4 kBaud) |
| IO-Link revision: | 1.1 |
| SDCI standard: | IEC 61131-9 CDV |
| IO-Link device ID: | 262 d / 00 01 06 h |
| Profiles: | no profile |
| SIO mode: | yes |
| Required master port type: | A |
| Process data analogue: | 3 |
| Process data binary: | 2 |
| Min. process cycle time [ms]: | 4.1 |
| Ambient temperature [°C]: | 0...60 |
| Storage temperature [°C]: | -20...85 |
| Max. relative air humidity [%]: | 90 |
| Protection: | IP 65 |
| EMC: | DIN EN 61000-6-2 DIN EN 61000-6-3 |
| Vibration resistance: | DIN EN 68000-2-6 5 g (55...2000 Hz) |
| DIN EN 68000-2-6: | 5 g (55...2000 Hz) |
| MTTF [years]: | 227 |
| Pressure Equipment Directive: | Sound engineering practice; can be used for group 2 fluids; group 1 fluids on request |
| Weight [g]: | 579 |
| Materials: | PBT-GF20; NBR; PC; stainless steel (1.4301 / 304); PTFE; brass coated; FKM; aluminium powder-coated |
| Materials (wetted parts): | stainless steel (1.4301 / 304); FKM; ceramics glass passivated; PEEK GF30; polyester; aluminium |
| Tightening torque [Nm]: | 50 |
| Process connection: | threaded connection G 1/2 DN15 |
| Display: | Display unit 5 x LED, green (Nl/min, Nm³/h, Nm/s, Nm³, °C) function display 1 x LED, green switching status 2 x LED, yellow measured values alphanumeric display, 4-digit programming alphanumeric display, 4-digit |
| Display unit: | 5 x LED, green (Nl/min, Nm³/h, Nm/s, Nm³, °C) |
| function display: | 1 x LED, green |
| switching status: | 2 x LED, yellow |
| measured values: | alphanumeric display, 4-digit |
| programming: | alphanumeric display, 4-digit |
| Remarks: | MW = measured value MEW = Final value of the measuring range Measuring, display and setting ranges refer to the standard volume flow according to DIN ISO 2533. For information about installation and operation please see the operating instructions. |
| Pack quantity: | 1 pcs. |
| Connection: | Connector: 1 x M12 |
Logistic parameters
| ECCN: | |
| Country of Origin: | DE |
| EAN: | |
| Weight: | 0.58 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |