Ifm SA5004

Flow sensor. SAD10XDB50KG/US-100

On Request. Please send us an email to inquire the price and avaliability.
"ucnguBrctvdgcxgt0eqo"

Description

Measurement of flow and temperature at the same time. Optimised for water, oils and air. Clearly visible 4-digit LED display. With two scalable analogue outputs. The process connection can be rotated for optimum alignment

Technical parameters

Number of inputs and outputs: Number of analogue outputs: 2
Process connection: threaded connection M18 x 1,5 internal thread
Special feature: Gold-plated contacts
Media: water; glycol solutions; air; oils
Note on media: low-viscosity oils with viscosity: ≤ 40 mm²/s (40 °C) high-viscosity oils with viscosity: > 40 mm²/s (40 °C)
Medium temperature [°C]: -20...90
Pressure rating [bar]: 100
MAWP (for applications according to CRN) [bar]: 100
Operating voltage [V]: 18...30 DC
Current consumption [mA]: < 100
Protection class: III
Reverse polarity protection: yes
Power-on delay time [s]: 10
Number of inputs and outputs: Number of analogue outputs: 2
Total number of outputs: 2
Output signal: analogue signal
Number of analogue outputs: 2
Analogue current output [mA]: 4...20; (scalable)
Max. load [Ω]: 350
Short-circuit protection: yes
Type of short-circuit protection: pulsed
Overload protection: yes
Probe length L [mm]: 45
Operating mode: relative; absolutely liquid; absolutely gaseous; (absolute: reference measurement recommended)
Note on factory setting: Operating mode: relative
Setting range [m/s]: 0.04...6
Greatest sensitivity [m/s]: 0.04...3
Setting range [m/s]: 0...200
Greatest sensitivity [m/s]: 2...100
Measuring range [°C]: -20...90
Resolution [°C]: 0.2
Analogue start point [°C]: -20...76
Analogue end point [°C]: 4...100
In steps of [°C]: 0.2
Temperature drift [cm/s x 1/K]: 0,003 m/s x 1/K (< 20 °C; > 70 °C)
Temperature gradient [K/min]: 100
Accuracy: ± (7 % MW + 2 % MEW); (for relative mode in the range of maximum sensitivity under the following conditions :; water: 20...70 °C; inlet length: 1.5 m; DN25 (DIN 2448); mounting position according to instructions; Accuracy can differ for other media and mounting positions.)
Repeatability: 0,05 m/s; (water; flow velocity: 0,05...3 m/s)
Temperature drift: ± 0,005 K/°C
Accuracy [K]: ± 0,3 / ± 1; (water; flow velocity: 0,3...3 m/s / air; flow velocity: > 10 m/s)
Response time [s]: 0.5; (T09; water; glycol: 0,8 s; air: 7 s; oil: 1,8 s; each T09)
Dynamic response T05 / T09 [s]: 1,5 (T09); (water; flow velocity: 0,3...3 m/s)
Parameter setting options: medium selection; Damping; Teach function; display can be rotated and switched off; standard unit of measurement; process value colour
Ambient temperature [°C]: -40...80
Storage temperature [°C]: -40...100
Protection: IP 65; IP 67
EMC: DIN EN 60947-5-9
Shock resistance: DIN EN 60068-2-27 50 g (11 ms)
DIN EN 60068-2-27: 50 g (11 ms)
Vibration resistance: DIN EN 60068-2-6 20 g (10...2000 Hz)
DIN EN 60068-2-6: 20 g (10...2000 Hz)
MTTF [years]: 180
UL approval: UL Approval no. I004 File number UL E174189
UL Approval no.: I004
File number UL: E174189
Weight [g]: 276
Materials: stainless steel (1.4404 / 316L); stainless steel (1.4310 / 301); PBT-GF20; PBT-GF30
Materials (wetted parts): stainless steel (1.4404 / 316L); Gasket: FKM
Process connection: threaded connection M18 x 1,5 internal thread
Display: Display unit 6 x LED, green (%, m/s, l/min, m³/h, °C, 10³) measured values alphanumeric display, red/green 4-digit
Display unit: 6 x LED, green (%, m/s, l/min, m³/h, °C, 10³)
measured values: alphanumeric display, red/green 4-digit
Remarks: MW = measured value MEW = Final value of the measuring range
Pack quantity: 1 pcs.
Connection: Connector: 1 x M12; Contacts: gold-plated

Logistic parameters

ECCN:
Country of Origin: DE
EAN:
Weight: 0.28 kg
Length: 0.00 m
Width: 0.00 m
Height: 0.00 m