View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Select language
1-Click Quote Request
Product
Ifm
SA4310
Request a Quote
Ifm SA4310
Flow sensor. SAEXXXXBFRKG/US-100
On Request. Please send us an email to inquire the price and avaliability.
"ucnguBrctvdgcxgt0eqo"
Description
Measurement of flow and temperature at the same time. Optimised for water, oils and air. Red/green display for clear identification of the acceptable range. With switching output, analogue signal and IO-Link. The process connection can be rotated for optimum alignment
Technical parameters
| Number of inputs and outputs: | Number of digital outputs: 2; Number of analogue outputs: 1 |
| Process connection: | diameter Ø 8 mm |
| Measuring range [°F]: | -4...212 |
| Special feature: | Gold-plated contacts |
| Media: | water; glycol solutions; air; oils |
| Note on media: | low-viscosity oils with viscosity: ≤ 40 mm²/s (104 °F) high-viscosity oils with viscosity: > 40 mm²/s (104 °F) |
| Medium temperature [°F]: | -4...212 |
| Pressure rating [bar]: | 50 |
| Pressure rating [psi]: | 725 |
| MAWP (for applications according to CRN) [bar]: | 50 |
| Operating voltage [V]: | 18...30 DC |
| Current consumption [mA]: | < 100 |
| Protection class: | III |
| Reverse polarity protection: | yes |
| Power-on delay time [s]: | 10 |
| Number of inputs and outputs: | Number of digital outputs: 2; Number of analogue outputs: 1 |
| Total number of outputs: | 2 |
| Output signal: | switching signal; analogue signal; frequency signal; IO-Link; (configurable) |
| Electrical design: | PNP/NPN |
| Number of digital outputs: | 2 |
| Output function: | normally open / normally closed; (parameterisable) |
| Max. voltage drop switching output DC [V]: | 2.5 |
| Permanent current rating of switching output DC [mA]: | 250 |
| Number of analogue outputs: | 1 |
| Analogue current output [mA]: | 4...20; (scalable) |
| Max. load [Ω]: | 350 |
| Short-circuit protection: | yes |
| Type of short-circuit protection: | pulsed |
| Overload protection: | yes |
| Frequency of the output [Hz]: | 0...1000 |
| Probe length L [mm]: | 200 |
| Operating mode: | relative; absolutely liquid; absolutely gaseous; (absolute: reference measurement recommended) |
| Note on factory setting: | Operating mode: relative |
| Setting range [ft/s]: | 0...19.5 |
| Greatest sensitivity [ft/s]: | 0.15...9.85 |
| Setting range [ft/s]: | 0...656 |
| Greatest sensitivity [ft/s]: | 6...328 |
| Measuring range [°F]: | -4...212 |
| Resolution [°F]: | 0.5 |
| Temperature drift [cm/s x 1/K]: | 0,01 fps x 1/K (< 68 °F; > 158 °F) |
| Temperature gradient [K/min]: | 100 |
| Accuracy: | ± (7 % MW + 2 % MEW); (for relative mode in the range of maximum sensitivity under the following conditions :; water: 68...158 °F; inlet length: 5 ft; DN25 (DIN 2448); mounting position according to instructions; Accuracy can differ for other media and mounting positions.) |
| Repeatability: | 0,05 m/s; (water; flow velocity: 0,05...3 m/s) |
| Temperature drift: | ± 0,003 K/°F |
| Accuracy [K]: | ± 0,3 / ± 1; (water; flow velocity: 1...9,85 fps / air; flow velocity: > 32,8 fps) |
| Response time [s]: | 0.5; (T09; water; glycol: 0,8 s; air: 7 s; oil: 1,8 s; each T09) |
| Dynamic response T05 / T09 [s]: | 1,5 (T09); (water; flow velocity: 1...9,85 fps) |
| Parameter setting options: | hysteresis / window; normally open / normally closed; switching logic; current/frequency output; medium selection; Damping; Teach function; display can be rotated and switched off; standard unit of measurement; process value colour |
| Communication interface: | IO-Link |
| Transmission type: | COM2 (38,4 kBaud) |
| IO-Link revision: | 1.1 |
| SDCI standard: | IEC 61131-9 |
| IO-Link device ID: | 537 d / 00 02 19 h (REL) |
| Profiles: | Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis |
| SIO mode: | yes |
| Required master port type: | A |
| Process data analogue: | 2 |
| Process data binary: | 2 |
| Min. process cycle time [ms]: | 3 |
| Ambient temperature [°F]: | -40...176 |
| Storage temperature [°F]: | -40...212 |
| Protection: | IP 65; IP 67 |
| EMC: | DIN EN 60947-5-9 |
| Shock resistance: | DIN EN 60068-2-27 50 g (11 ms) |
| DIN EN 60068-2-27: | 50 g (11 ms) |
| Vibration resistance: | DIN EN 60068-2-6 2 g (10...2000 Hz) |
| DIN EN 60068-2-6: | 2 g (10...2000 Hz) |
| MTTF [years]: | 143 |
| UL approval: | UL Approval no. I017 File number UL E174189 |
| UL Approval no.: | I017 |
| File number UL: | E174189 |
| Weight [g]: | 344.5 |
| Materials: | stainless steel (1.4404 / 316L); PBT-GF20; PBT-GF30 |
| Materials (wetted parts): | stainless steel (1.4404 / 316L) |
| Process connection: | diameter Ø 8 mm |
| Display: | Display unit 6 x LED, green (%, fps, gpm, cfm, °F, 10³) switching status 2 x LED, yellow measured values alphanumeric display, red/green 4-digit |
| Display unit: | 6 x LED, green (%, fps, gpm, cfm, °F, 10³) |
| switching status: | 2 x LED, yellow |
| measured values: | alphanumeric display, red/green 4-digit |
| Remarks: | MW = measured value MEW = Final value of the measuring range 544 d / 00 02 20 h (LIQU) 551 d / 00 02 27 h (GAS) |
| Pack quantity: | 1 pcs. |
| Connection: | Connector: 1 x M12; Contacts: gold-plated |
Logistic parameters
| ECCN: | |
| Country of Origin: | DE |
| EAN: | |
| Weight: | 0.34 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |