RM8007
Absolute multiturn encoder with hollow shaft. RMS0024-C24/UST
| Resolution: | 4096 steps; 4096 revolutions; 24 bit |
| Communication interface: | CAN |
| Shaft design: | hollow shaft open to one side |
| Shaft diameter [mm]: | 12 |
| Function principle: | absolute |
| Revolution type: | multiturn |
| Operating voltage [V]: | 9...30 DC; ("supply class 2" to cULus) |
| Current consumption [mA]: | < 100; ((10 V DC) ; ≤ 50 (24 V DC)) |
| Protection class: | III |
| Reverse polarity protection: | yes |
| Short-circuit protection: | yes |
| Code: | binary |
| Resolution: | 4096 steps; 4096 revolutions; 24 bit |
| Accuracy [°]: | 0.25 |
| Parameter setting options: | CAN parameter; scaling; preset; Baud rate; direction of rotation; Node ID |
| Communication interface: | CAN |
| Protocol: | CANopen |
| Factory settings: | Baud rate: 250 k node ID: 5 |
| Version: | DSP - 406 V3.1; DS 301 V4.02; DS 306 V2.0 |
| Ambient temperature [°C]: | -40...85 |
| Max. relative air humidity [%]: | 98 |
| Protection: | IP 65; (on the housing: IP 65; on the shaft: IP 64) |
| Shock resistance: | < 300 g (6 ms) |
| Vibration resistance: | 30 g (10...1000 Hz) |
| Weight [K40]: | 228 |
| Dimensions [mm]: | Ø 36.5 / L = 74 |
| Materials: | flange: aluminium; housing cap: steel powder-coated |
| Max. revolution, mechanical [U/min]: | 6000 |
| Max. starting torque [Nm]: | 3 |
| Reference temperature torque [°C]: | 25 |
| Shaft design: | hollow shaft open to one side |
| Shaft diameter [mm]: | 12 |
| Shaft material: | steel |
| Max. shaft load axial (at the shaft end) [N]: | 40 |
| Max. shaft load radial (at the shaft end) [N]: | 110 |
| Display: | Preoperational Mode LED, green Operational Mode LED, green flashing error message LED, red flashing |
| Preoperational Mode: | LED, green |
| Operational Mode: | LED, green flashing |
| error message: | LED, red flashing |
| ECCN: | |
| Country of Origin: | PL |
| EAN: | |
| Weight: | 0.23 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |