View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Select language
1-Click Quote Request
Product
Ifm
PQ3809
Request a Quote
Ifm PQ3809
Pressure sensor for pneumatics. PQ-1-1-KHR18-KFPKG/AS/
On Request. Please send us an email to inquire the price and avaliability.
"ucnguBrctvdgcxgt0eqo"
Description
Reliable monitoring of the system pressure in pneumatics and in compressed air systems. Very high overpressure and vacuum resistance. Clearly visible slanted LED display. Red/green display for clear identification of the acceptable range. With programmable switching output and analogue output
Technical parameters
| Output signal: | switching signal; analogue signal; IO-Link; (configurable) |
| Measuring range: | -1...1 bar -1000...1000 mbar -14.6...14.6 psi -29.4...29.4 inHg -100...100 kPa |
| -1...1 bar: | -1000...1000 mbar |
| Process connection: | threaded connection G 1/8 internal thread internal thread:M5 |
| Special feature: | Gold-plated contacts |
| Application: | for industrial applications |
| Conditionally suitable for: | other media on request |
| Medium temperature [°C]: | 0...60 |
| Min. bursting pressure: | 30 bar 435 psi 886 inHg 3000 kPa |
| 30 bar: | 435 psi |
| Note on min. burst pressure: | max. overpressure on second pressure connection: 12 bar / 1200 kPa / 174 PSI / 354,4 inHg / 1,2 MPa |
| Pressure rating: | 20 bar 290 psi 591 inHg 2000 kPa |
| 20 bar: | 290 psi |
| Vacuum resistance [mbar]: | -1000 |
| Type of pressure: | relative pressure; differential pressure; vacuum |
| Operating voltage [V]: | 18...32 DC; (according to EN 50178 SELV/PELV) |
| Current consumption [mA]: | < 50 |
| Min. insulation resistance [MΩ]: | 100; (500 V DC) |
| Protection class: | III |
| Reverse polarity protection: | yes |
| Overvoltage protection: | yes; (< 40 V) |
| Power-on delay time [s]: | 0.5 |
| Integrated watchdog: | yes |
| Number of inputs and outputs: | Number of digital outputs: 1; Number of analogue outputs: 1 |
| Total number of outputs: | 2 |
| Output signal: | switching signal; analogue signal; IO-Link; (configurable) |
| Electrical design: | PNP |
| Number of digital outputs: | 1 |
| Output function: | normally open / normally closed; (parameterisable) |
| Max. voltage drop switching output DC [V]: | 2 |
| Permanent current rating of switching output DC [mA]: | 100 |
| Switching frequency DC [Hz]: | < 100 |
| Number of analogue outputs: | 1 |
| Analogue current output [mA]: | 4...20 |
| Max. load [Ω]: | 500 |
| Short-circuit protection: | yes |
| Type of short-circuit protection: | pulsed |
| Measuring range: | -1...1 bar -1000...1000 mbar -14.6...14.6 psi -29.4...29.4 inHg -100...100 kPa |
| -1...1 bar: | -1000...1000 mbar |
| Set point SP: | -0.98...1 bar -14.2...14.6 psi -28.8...29.4 inHg -98...100 kPa |
| -0.98...1 bar: | -14.2...14.6 psi |
| Reset point rP: | -0.99...0.99 bar -14.4...14.4 psi -29.1...29.1 inHg -99...99 kPa |
| -0.99...0.99 bar: | -14.4...14.4 psi |
| In steps of: | 0.01 bar 0.2 psi 0.3 inHg 1 kPa |
| 0.01 bar: | 0.2 psi |
| Switch point accuracy [% of the span]: | < ± 0,5 |
| Repeatability [% of the span]: | < ± 0,1; (with temperature fluctuations < 10 K) |
| Characteristics deviation [% of the span]: | < ± 0,25 (BFSL) / < ± 0,5 (LS); (BFSL = Best Fit Straight Line; LS = limit value setting) |
| Hysteresis deviation [% of the span]: | < ± 0,25 |
| Long-term stability [% of the span]: | < ± 0,05; (per 6 months) |
| Temperature coefficient zero point [% of the span / 10 K]: | 0,2; (0...60 °C) |
| Temperature coefficient span [% of the span / 10 K]: | 0,2; (0...60 °C) |
| Response time [ms]: | < 6 |
| Delay time programmable dS, dr [s]: | 0; 0,002...5 |
| Step response time analogue output [ms]: | 6 |
| Parameter setting options: | hysteresis / window; normally open / normally closed; analogue output; IO-Link; switching logic; switch-on/switch-off delay; Damping; Display unit |
| Communication interface: | IO-Link |
| Transmission type: | COM2 (38,4 kBaud) |
| IO-Link revision: | 1.1 |
| SDCI standard: | IEC 61131-9 FDIS |
| IO-Link device ID: | 366 d / 00 01 6E h |
| Profiles: | Smart Sensor: Process Data Variable; Device Identification |
| SIO mode: | yes |
| Required master port type: | A |
| Process data analogue: | 1 |
| Process data binary: | 2 |
| Min. process cycle time [ms]: | 2.3 |
| Ambient temperature [°C]: | 0...70 |
| Storage temperature [°C]: | -25...85 |
| Protection: | IP 65 |
| EMC: | DIN EN 61000-6-2 DIN EN 61000-6-3 |
| Shock resistance: | DIN EN 60068-2-27 50 g (11 ms) |
| DIN EN 60068-2-27: | 50 g (11 ms) |
| Vibration resistance: | DIN EN 60068-2-6 20 g (10...2000 Hz) |
| DIN EN 60068-2-6: | 20 g (10...2000 Hz) |
| MTTF [years]: | 437 |
| Pressure Equipment Directive: | Sound engineering practice; can be used for group 2 fluids; group 1 fluids on request |
| Weight [K40]: | 86.5 |
| Materials: | PBT; FKM; polyester |
| Materials (wetted parts): | brass; FKM; silicon (coated); PBT |
| Min. pressure cycles: | 50 million |
| Process connection: | threaded connection G 1/8 internal thread internal thread:M5 |
| Display: | Display unit 4 x LED, green switching status 1 x LED, yellow function display alphanumeric display, 4-digit measured values alphanumeric display, 4-digit |
| Display unit: | 4 x LED, green |
| switching status: | 1 x LED, yellow |
| function display: | alphanumeric display, 4-digit |
| measured values: | alphanumeric display, 4-digit |
| Display unit: | bar; kPa; psi; inHg |
| Pack quantity: | 1 pcs. |
| Connection: | Connector: 1 x M8; Contacts: gold-plated |
Logistic parameters
| ECCN: | |
| Country of Origin: | RO |
| EAN: | |
| Weight: | 0.09 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |