View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Select language
1-Click Quote Request
Product
Ifm
PP004E
Request a Quote
Ifm PP004E
Pressure switch with ceramic measuring cell. PP-010-RBG14-QFPKG/US/ /V
On Request. Please send us an email to inquire the price and avaliability.
"ucnguBrctvdgcxgt0eqo"
Description
Suited for use in mobile machines. Two switching outputs, one of which can be configured as diagnostic output. High shock and vibration resistance. Excellent EMC resistance. User-friendly communication via IO-Link
Technical parameters
| Output signal: | switching signal; IO-Link; (configurable) |
| Measuring range: | -1...10 bar -14.5...145 psi -100...1000 kPa -0.1...1 MPa |
| -1...10 bar: | -14.5...145 psi |
| Process connection: | threaded connection G 1/4 external thread internal thread:M5 |
| Application: | for mobile applications |
| Media: | liquids and gases |
| Medium temperature [°C]: | -25...90 |
| Min. bursting pressure: | 150 bar 2175 psi 15 MPa |
| 150 bar: | 2175 psi |
| Pressure rating: | 75 bar 1087 psi 7.5 Mpa |
| 75 bar: | 1087 psi |
| Type of pressure: | relative pressure; vacuum |
| Operating voltage [V]: | 9.6...36 DC; (communication mode: 18...32) |
| Current consumption [mA]: | < 45 |
| Min. insulation resistance [MΩ]: | 100; (500 V DC) |
| Protection class: | III |
| Reverse polarity protection: | yes |
| Power-on delay time [s]: | 0.3 |
| Number of inputs and outputs: | Number of digital outputs: 2 |
| Total number of outputs: | 2 |
| Output signal: | switching signal; IO-Link; (configurable) |
| Electrical design: | PNP |
| Number of digital outputs: | 2 |
| Output function: | normally open / normally closed; (parameterisable) |
| Max. voltage drop switching output DC [V]: | 2 |
| Permanent current rating of switching output DC [mA]: | 250 |
| Switching frequency DC [Hz]: | 170 |
| Short-circuit protection: | yes |
| Type of short-circuit protection: | pulsed |
| Overload protection: | yes |
| Measuring range: | -1...10 bar -14.5...145 psi -100...1000 kPa -0.1...1 MPa |
| -1...10 bar: | -14.5...145 psi |
| Set point SP: | -0.9...10 bar -13...145 psi -0.09...1 MPa |
| -0.9...10 bar: | -13...145 psi |
| Reset point rP: | -0.95...9.95 bar -14...144 psi -0.095...0.995 MPa |
| -0.95...9.95 bar: | -14...144 psi |
| In steps of: | 0.05 bar 1 psi 0.005 MPa |
| 0.05 bar: | 1 psi |
| Factory setting: | SP1 = 2.50 bar rP1 = 2.30 bar SP2 = 7.50 bar rP2 = 7.30 bar OUT1 = Hno OUT2 = Hno |
| Switch point accuracy [% of the span]: | < ± 0,5 |
| Repeatability [% of the span]: | < ± 0,1; (with temperature fluctuations < 10 K) |
| Characteristics deviation [% of the span]: | < ± 0,25 (BFSL) / < ± 0,5 (LS); (BFSL = Best Fit Straight Line; LS = limit value setting) |
| Hysteresis deviation [% of the span]: | < ± 0,1 |
| Long-term stability [% of the span]: | < ± 0,1; (per year) |
| Temperature coefficient zero point [% of the span / 10 K]: | 0,2; (0...80 °C) |
| Temperature coefficient span [% of the span / 10 K]: | 0,2; (0...80 °C) |
| Response time [ms]: | < 3 |
| Damping for the switching output dAP in steps [s]: | 0,003 - 0,006 - 0,010 - 0,017 - 0,060 - 0,125 - 0,250 - 0,500 |
| Communication interface: | IO-Link |
| Transmission type: | COM2 (38,4 kBaud) |
| IO-Link revision: | 1.0 |
| IO-Link device ID: | 6 d / 00 00 06 h |
| Profiles: | no profile |
| SIO mode: | yes |
| Required master port type: | A |
| Process data analogue: | 1 |
| Process data binary: | 2 |
| Min. process cycle time [ms]: | 2.3 |
| Ambient temperature [°C]: | -25...85 |
| Storage temperature [°C]: | -40...100 |
| Protection: | IP 68; (7 days / 1 m water depth / 0.1 bar) |
| EMC: | immunity EN 61000-6-2 EN 61000-4-2 ESD 4 kV contact discharge / 15 kV air discharge EN 61000-4-3 HF radiated 20 V/m EN 61000-4-4 Burst 4 kV coupling clamp EN 61000-4-5 Surge 0,5 kV supply / 1 kV signal for DC units EN 61000-4-6 HF conducted 10 V immunity ECE R 10, Rev. 5 absorber chamber test to ISO 11452-2: 80 V/m EN 50155 Klasse T3, C1, S1 |
| immunity: | EN 61000-6-2 |
| EN 61000-4-2 ESD: | 4 kV contact discharge / 15 kV air discharge |
| EN 61000-4-3 HF radiated: | 20 V/m |
| EN 61000-4-4 Burst: | 4 kV coupling clamp |
| EN 61000-4-5 Surge: | 0,5 kV supply / 1 kV signal for DC units |
| EN 61000-4-6 HF conducted: | 10 V |
| immunity: | ECE R 10, Rev. 5 |
| absorber chamber test to ISO 11452-2:: | 80 V/m |
| EN 50155: | Klasse T3, C1, S1 |
| Shock resistance: | DIN IEC 60068-2-27 / DIN IEC 60068-2-29 1000 g DIN EN 61373 category 3 |
| DIN IEC 60068-2-27 / DIN IEC 60068-2-29: | 1000 g |
| DIN EN 61373: | category 3 |
| Vibration resistance: | DIN IEC 68-2-6 20 g (10...2000 Hz) DIN EN 60068-2-64 14 g DIN EN 61373 category 2 |
| DIN IEC 68-2-6: | 20 g (10...2000 Hz) |
| DIN EN 60068-2-64: | 14 g |
| DIN EN 61373: | category 2 |
| MTTF [years]: | 310 |
| Pressure Equipment Directive: | Sound engineering practice; can be used for group 2 fluids; group 1 fluids on request |
| Weight [g]: | 224 |
| Materials: | stainless steel (1.4301 / 304); FKM; EPDM/X; PA |
| Materials (wetted parts): | stainless steel (1.4305 / 303); ceramics; FKM |
| Min. pressure cycles: | 100 million |
| Process connection: | threaded connection G 1/4 external thread internal thread:M5 |
| Restrictor element integrated: | no (can be retrofitted) |
| Display: | operation 2 x LED, green switching status 2 x LED, yellow |
| operation: | 2 x LED, green |
| switching status: | 2 x LED, yellow |
| Teach function: | yes |
| Remarks: | with reference to UL: "limited voltage" with overcurrent protection in accordance with UL508 |
| Pack quantity: | 1 pcs. |
| Connection: | Connector: 1 x M12 |
Logistic parameters
| ECCN: | |
| Country of Origin: | RO |
| EAN: | |
| Weight: | 0.22 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |