PN7809
Pressure sensor with display. PN-001BRBR18-QFRKG/US/ /V
Two switching outputs, one of which can be configured as diagnostic output. For use in pneumatic applications. Clearly visible 4-digit LED display. Differential pressure measurement without the need to connect a second pressure pick-up. Country-specific pressure units selectable
Output signal: | switching signal |
Measuring range: | -1...1 bar -1000...1000 mbar -14.5...14.5 psi -100...100 kPa |
-1...1 bar: | -1000...1000 mbar |
Process connection: | threaded connection G 1/8 internal thread |
Special feature: | Gold-plated contacts |
Application: | for industrial applications |
Media: | compressed air |
Conditionally suitable for: | other media on request |
Medium temperature [°C]: | 0...60 |
Min. bursting pressure: | 30000 mbar 435 psi 3000 kPa |
30000 mbar: | 435 psi |
Pressure rating: | 20000 mbar 290 psi 2000 kPa |
20000 mbar: | 290 psi |
Type of pressure: | relative pressure; vacuum |
Operating voltage [V]: | 18...36 DC; (according to EN 50178 SELV/PELV) |
Current consumption [mA]: | < 50 |
Min. insulation resistance [MΩ]: | 100; (500 V DC) |
Protection class: | III |
Reverse polarity protection: | yes |
Overvoltage protection: | yes; (< 40 V) |
Power-on delay time [s]: | 0.3 |
Integrated watchdog: | yes |
Number of inputs and outputs: | Number of digital outputs: 2 |
Total number of outputs: | 2 |
Output signal: | switching signal |
Electrical design: | PNP/NPN |
Number of digital outputs: | 2 |
Output function: | normally open / normally closed; (parameterisable) |
Max. voltage drop switching output DC [V]: | 2 |
Permanent current rating of switching output DC [mA]: | 250 |
Switching frequency DC [Hz]: | < 170 |
Short-circuit protection: | yes |
Type of short-circuit protection: | pulsed |
Measuring range: | -1...1 bar -1000...1000 mbar -14.5...14.5 psi -100...100 kPa |
-1...1 bar: | -1000...1000 mbar |
Set point SP: | -975...1000 mbar -14.1...14.5 psi -97.5...100 kPa |
-975...1000 mbar: | -14.1...14.5 psi |
Reset point rP: | -980...995 mbar 14.2...14.4 psi -98...99.5 kPa |
-980...995 mbar: | 14.2...14.4 psi |
In steps of: | 5 mbar 0.1 psi 0.5 kPa |
5 mbar: | 0.1 psi |
Factory setting: | SP1 = -500 mbar rP1 = -540 mbar SP2 = 500 mbar rP2 = 460 mbar |
Switch point accuracy [% of the span]: | < ± 0,5 |
Repeatability [% of the span]: | < ± 0,1; (with temperature fluctuations < 10 K) |
Characteristics deviation [% of the span]: | < ± 0,25 (BFSL) / < ± 0,5 (LS); (BFSL = Best Fit Straight Line; LS = limit value setting) |
Hysteresis deviation [% of the span]: | < ± 0,25 |
Long-term stability [% of the span]: | < ± 0,05; (per 6 months) |
Temperature coefficient zero point [% of the span / 10 K]: | 0,2; (0...60 °C) |
Temperature coefficient span [% of the span / 10 K]: | 0,2; (0...60 °C) |
Delay time programmable dS, dr [s]: | 0; 0,2...50 |
Parameter setting options: | hysteresis / window; normally open / normally closed; diagnostic function; switching logic; switch-on/switch-off delay; Damping; Display unit |
Ambient temperature [°C]: | -25...85 |
Storage temperature [°C]: | -25...85 |
Protection: | IP 67 |
EMC: | EN 61000-4-2 ESD 4 kV CD / 8 kV AD EN 61000-4-3 HF radiated 10 V/m EN 61000-4-4 Burst 2 kV EN 61000-4-5 Surge 0,5/1 kV EN 61000-4-6 HF conducted 10 V |
EN 61000-4-2 ESD: | 4 kV CD / 8 kV AD |
EN 61000-4-3 HF radiated: | 10 V/m |
EN 61000-4-4 Burst: | 2 kV |
EN 61000-4-5 Surge: | 0,5/1 kV |
EN 61000-4-6 HF conducted: | 10 V |
Shock resistance: | DIN IEC 68-2-27 50 g (11 ms) |
DIN IEC 68-2-27: | 50 g (11 ms) |
Vibration resistance: | DIN IEC 68-2-6 20 g (10...2000 Hz) |
DIN IEC 68-2-6: | 20 g (10...2000 Hz) |
MTTF [years]: | 284 |
Pressure Equipment Directive: | Sound engineering practice; can be used for group 2 fluids; group 1 fluids on request |
Weight [g]: | 173 |
Materials: | stainless steel (1.4301 / 304); PPS; PC; PBT; PEI; FKM |
Materials (wetted parts): | stainless steel (1.4567 / 304Cu); brass; FKM; PPS; silicon (coated) |
Min. pressure cycles: | 50 million |
Process connection: | threaded connection G 1/8 internal thread |
Display: | Display unit 3 x LED, green switching status 2 x LED, yellow function display alphanumeric display, 4-digit measured values alphanumeric display, 4-digit |
Display unit: | 3 x LED, green |
switching status: | 2 x LED, yellow |
function display: | alphanumeric display, 4-digit |
measured values: | alphanumeric display, 4-digit |
Accessories (optional): | mounting set for DIN rail: TH 35-7,5 / EN60715, E37340 Adapter: R1/8 - R1/8, E37350 Thread extension: 1/8", E30075 push-in air fitting for tube: Ø 6 mm, E30076 push-in air fitting for tube: Ø 8 mm, E30077 |
Pack quantity: | 1 pcs. |
ECCN: | |
Country of Origin: | RO |
EAN: | |
Weight: | 0.17 kg |
Length: | 0.00 m |
Width: | 0.00 m |
Height: | 0.00 m |