View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Select language
1-Click Quote Request
Product
Ifm
PN016A
Request a Quote
Ifm PN016A
Pressure sensor with display. PN-2,5-RBR14-QFPKG/US/3D /V
On Request. Please send us an email to inquire the price and avaliability.
"ucnguBrctvdgcxgt0eqo"
Description
For applications in hazardous areas. Two switching outputs, one of which can be configured as diagnostic output. Clearly visible 4-digit LED display. Robust stainless steel housing for use in harsh industrial environments. Lifespan of more than 100 million pressure cycles
Technical parameters
| Output signal: | switching signal; IO-Link; (configurable) |
| Measuring range: | 0...2.5 bar 0...2500 mbar 0...36.3 psi 0...250 kPa |
| 0...2.5 bar: | 0...2500 mbar |
| Process connection: | threaded connection G 1/4 internal thread |
| Special feature: | Gold-plated contacts |
| Application: | for industrial applications |
| Media: | liquids and gases |
| Medium temperature [°C]: | -20...60 |
| Min. bursting pressure: | 50 bar 725 psi 5000 kPa |
| 50 bar: | 725 psi |
| Pressure rating: | 20 bar 290 psi 2000 kPa |
| 20 bar: | 290 psi |
| Type of pressure: | relative pressure |
| Operating voltage [V]: | 18...36 DC; (according to EN 50178 SELV/PELV) |
| Current consumption [mA]: | < 50 |
| Protection class: | III |
| Reverse polarity protection: | yes |
| Overvoltage protection: | yes; (< 40 V) |
| Power-on delay time [s]: | 0.3 |
| Integrated watchdog: | yes |
| Number of inputs and outputs: | Number of digital outputs: 2 |
| Total number of outputs: | 2 |
| Output signal: | switching signal; IO-Link; (configurable) |
| Electrical design: | PNP/NPN |
| Number of digital outputs: | 2 |
| Output function: | normally open / normally closed; (parameterisable) |
| Max. voltage drop switching output DC [V]: | 2 |
| Permanent current rating of switching output DC [mA]: | 250 |
| Switching frequency DC [Hz]: | < 170 |
| Short-circuit protection: | yes |
| Type of short-circuit protection: | pulsed |
| Measuring range: | 0...2.5 bar 0...2500 mbar 0...36.3 psi 0...250 kPa |
| 0...2.5 bar: | 0...2500 mbar |
| Set point SP: | 0.02...2.5 bar 0.4...36.2 psi 2...250 kPa |
| 0.02...2.5 bar: | 0.4...36.2 psi |
| Reset point rP: | 0.01...2.49 bar 0.2...36 psi 1...249 kPa |
| 0.01...2.49 bar: | 0.2...36 psi |
| In steps of: | 0.01 bar 0.2 psi 1 kPa |
| 0.01 bar: | 0.2 psi |
| Factory setting: | SP1 = 0.63 bar rP1 = 0.58 bar SP2 = 1.88 bar rP2 = 1.83 bar |
| SP1 = 0.63 bar: | rP1 = 0.58 bar |
| SP2 = 1.88 bar: | rP2 = 1.83 bar |
| Switch point accuracy [% of the span]: | < ± 0,5 |
| Repeatability [% of the span]: | < ± 0,1; (with temperature fluctuations < 10 K) |
| Characteristics deviation [% of the span]: | < ± 0,25 (BFSL) / < ± 0,5 (LS); (BFSL = Best Fit Straight Line; LS = limit value setting) |
| Hysteresis deviation [% of the span]: | < ± 0,25 |
| Long-term stability [% of the span]: | < ± 0,05; (per 6 months) |
| Temperature coefficient zero point [% of the span / 10 K]: | 0,2; (0...60 °C) |
| Temperature coefficient span [% of the span / 10 K]: | 0,2; (0...60 °C) |
| Delay time programmable dS, dr [s]: | 0; 0,2...50 |
| Parameter setting options: | hysteresis / window; normally open / normally closed; diagnostic function; switching logic; switch-on/switch-off delay; Damping; Display unit |
| Communication interface: | IO-Link |
| Transmission type: | COM2 (38,4 kBaud) |
| IO-Link revision: | 1.1 |
| SDCI standard: | IEC 61131-9 CDV |
| IO-Link device ID: | 312 d / 00 01 38 h |
| Profiles: | no profile |
| SIO mode: | yes |
| Required master port type: | A |
| Process data analogue: | 1 |
| Process data binary: | 2 |
| Min. process cycle time [ms]: | 2.3 |
| Ambient temperature [°C]: | -20...60 |
| Storage temperature [°C]: | -40...100 |
| Protection: | IP 65 |
| ATEX marking: | II 3D Ex tc IIIC T80°C Dc X |
| EMC: | EN 61000-4-2 ESD 4 kV CD / 8 kV AD EN 61000-4-3 HF radiated 10 V/m EN 61000-4-4 Burst 2 kV EN 61000-4-5 Surge 0,5/1 kV EN 61000-4-6 HF conducted 10 V |
| EN 61000-4-2 ESD: | 4 kV CD / 8 kV AD |
| EN 61000-4-3 HF radiated: | 10 V/m |
| EN 61000-4-4 Burst: | 2 kV |
| EN 61000-4-5 Surge: | 0,5/1 kV |
| EN 61000-4-6 HF conducted: | 10 V |
| Shock resistance: | DIN IEC 68-2-27 50 g (11 ms) |
| DIN IEC 68-2-27: | 50 g (11 ms) |
| Vibration resistance: | DIN IEC 68-2-6 20 g (10...2000 Hz) |
| DIN IEC 68-2-6: | 20 g (10...2000 Hz) |
| MTTF [years]: | 194 |
| Pressure Equipment Directive: | Sound engineering practice; can be used for group 2 fluids; group 1 fluids on request |
| Weight [g]: | 303 |
| Materials: | stainless steel (1.4301 / 304); stainless steel (1.4404 / 316L); PC; PBT; PEI; FKM; PTFE |
| Materials (wetted parts): | stainless steel (1.4305 / 303); ceramics; FKM |
| Min. pressure cycles: | 100 million |
| Process connection: | threaded connection G 1/4 internal thread |
| Restrictor element integrated: | no (can be retrofitted) |
| Display: | Display unit 3 x LED, green switching status 2 x LED, yellow function display alphanumeric display, 4-digit measured values alphanumeric display, 4-digit |
| Display unit: | 3 x LED, green |
| switching status: | 2 x LED, yellow |
| function display: | alphanumeric display, 4-digit |
| measured values: | alphanumeric display, 4-digit |
| Pack quantity: | 1 pcs. |
Logistic parameters
| ECCN: | |
| Country of Origin: | RO |
| EAN: | |
| Weight: | 0.30 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |