PL2053
Flush pressure transmitter. PL-025-RES30-E-ZVG/US/ /P
Overload-resistant ceramic measuring cell. Resistant to pressure peaks and vacuum. Fast installation and maintenance-free operation. Scalable analogue output. Intuitive, user-friendly handling
Output signal: | analogue signal |
Measuring range: | -1...25 bar -15...363 psi -0.1...2.5 MPa |
-1...25 bar: | -15...363 psi |
Process connection: | threaded connection Aseptoflex external thread Aseptoflex |
Special feature: | Gold-plated contacts |
Application: | food and beverage industry |
Media: | viscous media and liquids with suspended particles; liquids and gases |
Medium temperature [°C]: | -25...80 |
Min. bursting pressure: | 350 bar 5070 psi 35 MPa |
350 bar: | 5070 psi |
Pressure rating: | 100 bar 1450 psi 10 Mpa |
100 bar: | 1450 psi |
Type of pressure: | relative pressure |
No dead space: | yes |
Operating voltage [V]: | 14...30 DC |
Min. insulation resistance [MΩ]: | 100; (500 V DC) |
Protection class: | III |
Reverse polarity protection: | yes |
Number of inputs and outputs: | Number of analogue outputs: 1 |
Total number of outputs: | 1 |
Output signal: | analogue signal |
Number of analogue outputs: | 1 |
Analogue current output [mA]: | 4...20 |
Max. load [Ω]: | 550; (Ub = 24 V; (Ub - 13 V) / 20 mA) |
Overload protection: | yes |
Measuring range: | -1...25 bar -15...363 psi -0.1...2.5 MPa |
-1...25 bar: | -15...363 psi |
Analogue start point: | -1...18.8 bar -15...272 psi -0.1...1.88 MPa |
-1...18.8 bar: | -15...272 psi |
Analogue end point: | 5.3...25 bar 76...363 psi 0.53...2.5 MPa |
5.3...25 bar: | 76...363 psi |
In steps of: | 0.1 bar 1 psi 0.01 MPa |
0.1 bar: | 1 psi |
Factory setting: | ASP = 0.0 bar AEP = 25.0 bar |
Repeatability [% of the span]: | < ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1) |
Characteristics deviation [% of the span]: | < ± 0,6; (Turn down 1:1 linearity, incl. hysteresis and repeatability limit value setting to DIN 16086) |
Linearity deviation [% of the span]: | < ± 0,5; (Turn down 1:1) |
Hysteresis deviation [% of the span]: | < ± 0,1; (Turn down 1:1) |
Long-term stability [% of the span]: | < ± 0,1; (Turn down 1:1; per year) |
Temperature coefficient zero point [% of the span / 10 K]: | < ± 0,1; (0...80 °C) |
Temperature coefficient span [% of the span / 10 K]: | < ± 0,2; (0...80 °C) |
Max. response time analogue output [ms]: | 3 |
Parameter setting options: | zero point; span |
Communication interface: | EPS |
Ambient temperature [°C]: | -25...80 |
Storage temperature [°C]: | -40...100 |
Protection: | IP 67 |
EMC: | EN 61000-4-2 ESD 4 kV CD / 8 kV AD EN 61000-4-3 HF radiated 10 V/m EN 61000-4-4 Burst 2 kV EN 61000-4-6 HF conducted 10 V |
EN 61000-4-2 ESD: | 4 kV CD / 8 kV AD |
EN 61000-4-3 HF radiated: | 10 V/m |
EN 61000-4-4 Burst: | 2 kV |
EN 61000-4-6 HF conducted: | 10 V |
Shock resistance: | DIN IEC 68-2-27 50 g (11 ms) |
DIN IEC 68-2-27: | 50 g (11 ms) |
Vibration resistance: | DIN IEC 68-2-6 20 g (10...2000 Hz) |
DIN IEC 68-2-6: | 20 g (10...2000 Hz) |
MTTF [years]: | 271 |
Weight [g]: | 319 |
Materials: | stainless steel (1.4404 / 316L); PEI; FKM |
Materials (wetted parts): | ceramics (99.9 % Al2O3); stainless steel (1.4435 / 316L); surface characteristics: Ra < 0,4 / Rz 4; PTFE |
Min. pressure cycles: | 100 million |
Process connection: | threaded connection Aseptoflex external thread Aseptoflex |
Remarks: | The 3-A qualification is only valid if adapters with 3-A qualification are used for installation. |
Pack quantity: | 1 pcs. |
Connection: | Connector: 1 x M12; Contacts: gold-plated |
ECCN: | |
Country of Origin: | DE |
EAN: | |
Weight: | 0.32 kg |
Length: | 0.00 m |
Width: | 0.00 m |
Height: | 0.00 m |