PI7093
PI-025-RES30-QFRKG/US/ /P
Flush pressure sensor with display. PI-025-RES30-QFRKG/US/ /P
Output signal: | switching signal |
Measuring range: | -1...25 bar -14.4...362.7 psi -0.1...2.5 MPa |
-1...25 bar: | -14.4...362.7 psi |
Process connection: | threaded connection Aseptoflex external thread Aseptoflex |
Special feature: | Gold-plated contacts |
Application: | food and beverage industry |
Installation: | freely rotatable housing 350° |
Media: | viscous media and liquids with suspended particles; liquids and gases |
Medium temperature [°C]: | -25...125; (145 max. 1h) |
Min. bursting pressure: | 350 bar 5070 psi 35 MPa |
350 bar: | 5070 psi |
Pressure rating: | 100 bar 1450 psi 10 Mpa |
100 bar: | 1450 psi |
Type of pressure: | relative pressure |
No dead space: | yes |
Operating voltage [V]: | 18...32 DC |
Current consumption [mA]: | < 50 |
Min. insulation resistance [MΩ]: | 100; (500 V DC) |
Protection class: | III |
Reverse polarity protection: | yes |
Power-on delay time [s]: | 0.5 |
Integrated watchdog: | yes |
Number of inputs and outputs: | Number of digital outputs: 2 |
Total number of outputs: | 2 |
Output signal: | switching signal |
Electrical design: | PNP/NPN |
Number of digital outputs: | 2 |
Output function: | normally open / normally closed; (parameterisable) |
Max. voltage drop switching output DC [V]: | 2 |
Permanent current rating of switching output DC [mA]: | 250 |
Switching frequency DC [Hz]: | 85 |
Short-circuit protection: | yes |
Type of short-circuit protection: | pulsed |
Overload protection: | yes |
Measuring range: | -1...25 bar -14.4...362.7 psi -0.1...2.5 MPa |
-1...25 bar: | -14.4...362.7 psi |
Set point SP: | -0.96...25 bar -13.8...362.7 psi -0.096...2.5 MPa |
-0.96...25 bar: | -13.8...362.7 psi |
Reset point rP: | -1...24.96 bar -14.4...362.1 psi -0.1...2.496 MPa |
-1...24.96 bar: | -14.4...362.1 psi |
In steps of: | 0.02 bar 0.3 psi 0.002 MPa |
0.02 bar: | 0.3 psi |
Factory setting: | SP1 = 6.24 bar rP1 = 5.74 bar SP2 = 18.74 bar rP2 = 18.30 bar |
Switch point accuracy [% of the span]: | < ± 0,2; (Turn down 1:1) |
Repeatability [% of the span]: | < ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1) |
Characteristics deviation [% of the span]: | < ± 0,2; (Turn down 1:1 linearity, incl. hysteresis and repeatability limit value setting to DIN 16086) |
Linearity deviation [% of the span]: | < ± 0,15; (Turn down 1:1) |
Hysteresis deviation [% of the span]: | < ± 0,15; (Turn down 1:1) |
Long-term stability [% of the span]: | < ± 0,1; (Turn down 1:1; per year) |
Temperature coefficient zero point [% of the span / 10 K]: | < ± 0,05; (0...70 °C) |
Temperature coefficient span [% of the span / 10 K]: | < ± 0,15; (0...70 °C) |
Response time [ms]: | < 6 |
Damping for the switching output dAP [s]: | 0...100 |
Parameter setting options: | hysteresis / window; normally open / normally closed; switching logic; Damping; adaptation of displayed values; display can be rotated and switched off; Display unit; zero point; span |
Ambient temperature [°C]: | -25...80 |
Storage temperature [°C]: | -40...100 |
Protection: | IP 67; IP 69K |
EMC: | EN 61000-4-2 ESD 4 kV CD / 8 kV AD EN 61000-4-3 HF radiated 10 V/m EN 61000-4-4 Burst 2 kV EN 61000-4-5 Surge 0,5/1 kV EN 61000-4-6 HF conducted 10 V |
EN 61000-4-2 ESD: | 4 kV CD / 8 kV AD |
EN 61000-4-3 HF radiated: | 10 V/m |
EN 61000-4-4 Burst: | 2 kV |
EN 61000-4-5 Surge: | 0,5/1 kV |
EN 61000-4-6 HF conducted: | 10 V |
Shock resistance: | DIN IEC 68-2-27 50 g (11 ms) |
DIN IEC 68-2-27: | 50 g (11 ms) |
Vibration resistance: | DIN IEC 68-2-6 20 g (10...2000 Hz) |
DIN IEC 68-2-6: | 20 g (10...2000 Hz) |
MTTF [years]: | 178 |
Weight [g]: | 400.8 |
Materials: | stainless steel (1.4404 / 316L); PC; PBT; PEI; FKM; PTFE |
Materials (wetted parts): | ceramics (99.9 % Al2O3); PTFE; stainless steel (1.4435 / 316L); surface characteristics: Ra < 0,4 / Rz 4 |
Min. pressure cycles: | 100 million |
Process connection: | threaded connection Aseptoflex external thread Aseptoflex |
Display: | Display unit 4 x LED, green switching status 2 x LED, yellow measured values alphanumeric display, 4-digit parameter setting alphanumeric display, 4-digit |
Display unit: | 4 x LED, green |
switching status: | 2 x LED, yellow |
measured values: | alphanumeric display, 4-digit |
parameter setting: | alphanumeric display, 4-digit |
Display unit: | bar; psi; MPa; % of the span |
Remarks: | The 3-A qualification is only valid if adapters with 3-A qualification are used for installation. |
Notes: | discontinued article |
Pack quantity: | 1 pcs. |
ECCN: | |
Country of Origin: | DEUTSCHLAND |
EAN: | |
Weight: | 0.40 kg |
Length: | 0.00 m |
Width: | 0.00 m |
Height: | 0.00 m |