PE7009
Pressure sensor with display. PE-1-1BRDR14-QFRKG/US/ /E
Special seal for use in cleaning processes. Two switching outputs, one of which can be configured as diagnostic output. With long-term stability thanks to high overload protection. Clearly visible 4-digit LED display. High shock and vibration resistance
| Output signal: | switching signal; IO-Link; (configurable) | 
| Measuring range: | -1...1 bar -1000...1000 mbar | 
| -1...1 bar: | -1000...1000 mbar | 
| Process connection: | threaded connection G 1/4 internal thread | 
| Special feature: | Gold-plated contacts | 
| Application: | for industrial applications | 
| Media: | liquids and gases | 
| Cannot be used for: | oils | 
| Medium temperature [°C]: | -25...80 | 
| Min. bursting pressure [mbar]: | 50000 | 
| Pressure rating [mbar]: | 20000 | 
| Type of pressure: | relative pressure; vacuum | 
| Operating voltage [V]: | according to EN 50178 SELV/PELV | 
| Current consumption [mA]: | < 50 | 
| Min. insulation resistance [MΩ]: | 100; (500 V DC) | 
| Protection class: | III | 
| Reverse polarity protection: | yes | 
| Overvoltage protection: | yes; (< 40 V) | 
| Power-on delay time [s]: | 0.3 | 
| Integrated watchdog: | yes | 
| Number of inputs and outputs: | Number of digital outputs: 2 | 
| Total number of outputs: | 2 | 
| Output signal: | switching signal; IO-Link; (configurable) | 
| Electrical design: | PNP/NPN | 
| Number of digital outputs: | 2 | 
| Output function: | normally open / normally closed; (parameterisable) | 
| Max. voltage drop switching output DC [V]: | 2 | 
| Permanent current rating of switching output DC [mA]: | 250 | 
| Switching frequency DC [Hz]: | < 170 | 
| Short-circuit protection: | yes | 
| Type of short-circuit protection: | pulsed | 
| Measuring range: | -1...1 bar -1000...1000 mbar | 
| -1...1 bar: | -1000...1000 mbar | 
| Set point SP [mbar]: | -970...1000 | 
| Reset point rP [mbar]: | -980...990 | 
| In steps of [mbar]: | 10 | 
| Factory setting: | SP1 = -500 mbar rP1 = -540 mbar SP2 = 500 mbar rP2 = 460 mbar | 
| Switch point accuracy [% of the span]: | < ± 0,5 | 
| Repeatability [% of the span]: | < ± 0,1; (with temperature fluctuations < 10 K) | 
| Characteristics deviation [% of the span]: | < ± 0,25 (BFSL) / < ± 0,5 (LS); (BFSL = Best Fit Straight Line; LS = limit value setting) | 
| Hysteresis deviation [% of the span]: | < ± 0,25 | 
| Long-term stability [% of the span]: | < ± 0,05; (per 6 months) | 
| Temperature coefficient zero point [% of the span / 10 K]: | 0,2; (-20...80 °C) | 
| Temperature coefficient span [% of the span / 10 K]: | 0,2; (-20...80 °C) | 
| Delay time programmable dS, dr [s]: | 0; 0,2...50 | 
| Parameter setting options: | hysteresis / window; normally open / normally closed; diagnostic function; switching logic; switch-on/switch-off delay; Damping; Display unit | 
| Communication interface: | IO-Link | 
| Transmission type: | COM2 (38,4 kBaud) | 
| IO-Link revision: | 1.1 | 
| IO-Link device ID: | 314 d / 00 01 3A h | 
| Profiles: | no profile | 
| SIO mode: | yes | 
| Required master port type: | A | 
| Process data analogue: | 1 | 
| Process data binary: | 2 | 
| Min. process cycle time [ms]: | 2.3 | 
| Ambient temperature [°C]: | -20...80 | 
| Storage temperature [°C]: | -40...100 | 
| Protection: | IP 67 | 
| EMC: | EN 61000-6-2 EN 61000-6-3 | 
| Shock resistance: | DIN EN 60068-2-27 50 g (11 ms) | 
| DIN EN 60068-2-27: | 50 g (11 ms) | 
| Vibration resistance: | DIN EN 60068-2-6 20 g (10...2000 Hz) | 
| DIN EN 60068-2-6: | 20 g (10...2000 Hz) | 
| MTTF [years]: | 237 | 
| Pressure Equipment Directive: | Sound engineering practice; can be used for group 2 fluids; group 1 fluids on request | 
| Weight [g]: | 262 | 
| Materials: | stainless steel (1.4301 / 304); stainless steel (1.4404 / 316L); PC; PBT; PEI; FKM; EPDM/X; PTFE | 
| Materials (wetted parts): | stainless steel (1.4404 / 316L); ceramics (99.9 % Al2O3); sealing of the measuring cell: EPDM | 
| Min. pressure cycles: | 100 million | 
| Process connection: | threaded connection G 1/4 internal thread | 
| Display: | Display unit 4 x LED, green switching status 2 x LED, yellow function display alphanumeric display, 4-digit measured values alphanumeric display, 4-digit | 
| Display unit: | 4 x LED, green | 
| switching status: | 2 x LED, yellow | 
| function display: | alphanumeric display, 4-digit | 
| measured values: | alphanumeric display, 4-digit | 
| Display unit: | mbar; kPa; psi; inHg | 
| Notes: | discontinued article | 
| Pack quantity: | 1 pcs. | 
| ECCN: | |
| Country of Origin: | DE | 
| EAN: | |
| Weight: | 0.26 kg | 
| Length: | 0.00 m | 
| Width: | 0.00 m | 
| Height: | 0.00 m |