View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Select language
1-Click Quote Request
Product
Ifm
OPD100
Request a Quote
Ifm OPD100
Contour sensor. OPDLFPKG
On Request. Please send us an email to inquire the price and avaliability.
"ucnguBrctvdgcxgt0eqo"
Description
PMD Profiler for object profile checking. Inline quality control checks to ensure correct assembly of parts. Quick set-up without software. Distance-independent measurement for high tolerance on object positioning. Immunity to extraneous light – no screening or external illumination required. Optional contour visualisation via software to simplify the failure analysis
Technical parameters
| Type of light: | red light |
| Communication interface: | IO-Link |
| Laser protection class: | 1 |
| Dimensions [mm]: | 88 x 65 x 28.5 |
| Operating voltage [V]: | 10...30 DC |
| Current consumption [mA]: | < 200 |
| Current consumption reference voltage [V]: | 10 |
| Protection class: | III |
| Reverse polarity protection: | yes |
| Type of light: | red light |
| Wave length [nm]: | 650 |
| Number of inputs and outputs: | Number of digital inputs: 1; Number of digital outputs: 2 |
| Number of digital inputs: | 1 |
| Trigger: | external |
| Electrical design: | PNP/NPN; (parameterisable) |
| Number of digital outputs: | 2 |
| Output function: | 2 x normally open / normally closed; (parameterisable) |
| Max. current load per output [mA]: | 100 |
| Type of short-circuit protection: | pulsed |
| Overload protection: | yes |
| Measuring distance (Z-direction) [mm]: | 150...300 |
| Width of the measuring range (X-direction) at min. measuring distance [mm]: | 45; (distance = 150mm) |
| Width of the measuring range (X-direction) at max. measuring distance [mm]: | 90; (distance = 300mm) |
| Sampling rate [Hz]: | 5 |
| Measured value resolution: | Z-direction 200 µm X-direction 250 µm |
| Accuracy: | Z-direction ± 500 µm X-direction ± 500 µm background (white 90 % remission) |
| Communication interface: | IO-Link |
| Transmission type: | COM3 (230,4 kBaud) |
| IO-Link revision: | 1.1 |
| SDCI standard: | IEC 61131-9 |
| Profiles: | Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis |
| SIO mode: | yes |
| Required master port type: | A |
| Min. process cycle time [ms]: | 2.3 |
| IO-Link process data (cyclical): | function bit length process value 16 device status 4 binary switching information 1 |
| function: | bit length |
| process value: | 16 |
| device status: | 4 |
| binary switching information: | 1 |
| IO-Link functions (acyclical): | operating hours counter; number of trigger events; ROI setting |
| Supported DeviceIDs: | 1260d / 04 ECh |
| Note: | For further information please see the IODD PDF file under "Downloads" |
| Ambient temperature [°C]: | -10...55 |
| Storage temperature [°C]: | -40...60 |
| Protection: | IP 65 |
| Max. immunity to extraneous light [klx]: | 20 |
| EMC: | EN 60947-5-2 |
| Laser protection class: | 1 |
| Notes on laser protection: | Caution: laser light laser class: 1 EN / IEC60825-1:2007 EN / IEC60825-1:2014 Complies with 21 CFR 1040 except for deviations pursuant to Laser Notice No. 50, dated June 2007. |
| Caution:: | laser light |
| laser class:: | 1 |
| Weight [K40]: | 484.9 |
| Dimensions [mm]: | 88 x 65 x 28.5 |
| Materials: | Housing: diecast zinc ; PPSU; ABS; PMMA; PBT / PC; EPDM; front lens: PMMA |
| Display: | switching status 1 x LED, yellow Display operation 1 x LED, green colour display |
| switching status: | 1 x LED, yellow |
| Display operation: | 1 x LED, green |
| Pack quantity: | 1 pcs. |
| Connection: | Connector: 1 x M12 |
| measuring distance (Z-direction): | light line |
| 150 mm: | 50 x 1 mm |
| 300 mm: | 100 x 1 mm |
| Extraneous light on the object: | < 20 klx |
| constant ambient conditions: | 23 °C / 960 hPa |
| minimum power-on time in minutes: | 10 |
Logistic parameters
| ECCN: | |
| Country of Origin: | DE |
| EAN: | |
| Weight: | 0.48 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |