OJ5075
Retro-reflective sensor. OJP-FPKG/SO/AS
Type of light: | red light |
Housing: | rectangular |
Dimensions [mm]: | 35 x 11 x 24 |
Special feature: | polarisation filter |
Function principle: | Retro-reflective sensor |
Operating voltage [V]: | 10...30 DC |
Current consumption [mA]: | < 22 |
Protection class: | III |
Reverse polarity protection: | yes |
Type of light: | red light |
Electrical design: | PNP |
Output function: | light-on/dark-on mode; (programmable) |
Max. voltage drop switching output DC [V]: | 2.5 |
Permanent current rating of switching output DC [mA]: | 200 |
Switching frequency DC [Hz]: | 2000 |
Short-circuit protection: | yes |
Type of short-circuit protection: | pulsed |
Overload protection: | yes |
Range referred to prismatic reflector [m]: | 0...2; (Prismatic reflector Ø 80 E20005) |
Range adjustable: | yes |
Max. light spot diameter [mm]: | 64 |
Light spot dimensions refer to: | at maximum range |
Polarisation filter available: | yes |
Ambient temperature [°C]: | -25...60 |
Protection: | IP 67 |
EMC: | EN 60947-5-2 |
MTTF [years]: | 854 |
Weight [g]: | 40.4 |
Housing: | rectangular |
Dimensions [mm]: | 35 x 11 x 24 |
Materials: | housing: ABS; fixture: diecast zinc; LED window: SEPS; pushbutton: SEPS |
Lens material: | glass |
Lens alignment: | side lens |
Display: | switching status 1 x LED, yellow operation 1 x LED, green function 1 x LED, red |
switching status: | 1 x LED, yellow |
operation: | 1 x LED, green |
function: | 1 x LED, red |
Electronic lock: | yes |
Accessories (supplied): | Basic clip screws: 2 x M3 x 16 spring washers: 2 Nuts: 2 Reflective tape: 1 x 15 x 20 mm |
Pack quantity: | 1 pcs. |
Connection: | Connector: 1 x M8 |
ECCN: | |
Country of Origin: | SG |
EAN: | |
Weight: | 0.04 kg |
Length: | 0.00 m |
Width: | 0.00 m |
Height: | 0.00 m |