OGP100
Retro-reflective sensor. OGP-DPKG/US
Very long range. For use in conveying and materials handling. Ready for operation immediately thanks to fixed setting. Excellent price/performance ratio. Low-cost alternative to units with metal housing
| Type of light: | red light |
| Housing: | threaded type |
| Dimensions [mm]: | M18 x 1 / L = 44 |
| Special feature: | polarisation filter |
| Function principle: | Retro-reflective sensor |
| Operating voltage [V]: | 10...30 DC |
| Current consumption [mA]: | 20 |
| Protection class: | III |
| Reverse polarity protection: | yes |
| Type of light: | red light |
| Wave length [nm]: | 645 |
| Electrical design: | PNP |
| Output function: | dark-on mode |
| Max. voltage drop switching output DC [V]: | 2.5 |
| Permanent current rating of switching output DC [mA]: | 200 |
| Switching frequency DC [Hz]: | 1000 |
| Short-circuit protection: | yes |
| Overload protection: | yes |
| Range referred to prismatic reflector [m]: | 0.05...2.5; (Prismatic reflector Ø 80 E20005) |
| Range adjustable: | no |
| Max. light spot diameter [mm]: | 200 |
| Light spot dimensions refer to: | at maximum range |
| Polarisation filter available: | yes |
| Ambient temperature [°C]: | -25...60 |
| Protection: | IP 67; (in conjunction with a corresponding connector) |
| EMC: | EN 60947-5-2 |
| MTTF [years]: | 1173 |
| Weight [g]: | 14.6 |
| Housing: | threaded type |
| Dimensions [mm]: | M18 x 1 / L = 44 |
| Thread designation: | M18 x 1 |
| Materials: | housing: ABS |
| Lens material: | PMMA |
| Display: | switching status 1 x LED, yellow |
| switching status: | 1 x LED, yellow |
| Accessories (supplied): | lock nuts: 2 x |
| Pack quantity: | 1 pcs. |
| Connection: | Connector: 1 x M12 |
| ECCN: | |
| Country of Origin: | SG |
| EAN: | |
| Weight: | 0.01 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |