OGH381
Diffuse reflection sensor with background suppression. OGH-HPKG/US/V4A/CUBE/200MM
Robust rectangular stainless steel housing with M18 thread on the side. Resistant to high-pressure cleaning with aggressive cleaning agents. High protection rating for the requirements of the food and beverage industry. Ready for operation immediately thanks to fixed setting. Precise background suppression
| Type of light: | red light |
| Communication interface: | IO-Link |
| Housing: | rectangular |
| Dimensions [mm]: | M18 x 1 |
| Special feature: | Background suppression |
| Function principle: | Diffuse reflection sensor |
| Operating voltage [V]: | 10...30 DC |
| Rated insulation voltage [V]: | 32 |
| Current consumption [mA]: | 25 |
| Protection class: | III |
| Reverse polarity protection: | yes |
| Max. power-on delay time [ms]: | 300 |
| Type of light: | red light |
| Wave length [nm]: | 645 |
| Electrical design: | PNP |
| Output function: | light-on mode |
| Max. voltage drop switching output DC [V]: | 2.5 |
| Permanent current rating of switching output DC [mA]: | 200 |
| Switching frequency DC [Hz]: | 1000 |
| Short-circuit protection: | yes |
| Type of short-circuit protection: | pulsed |
| Range [mm]: | < 200; (white paper 200 x 200 mm 90% remission) |
| Range on white object (90 % remission) [mm]: | < 200 |
| Range on grey object (18 % remission) [mm]: | < 200 |
| Range on black object (6 % remission) [mm]: | < 190 |
| Range adjustable: | no |
| Max. light spot diameter [mm]: | 13 |
| Light spot dimensions refer to: | at maximum range |
| Background suppression available: | yes |
| Communication interface: | IO-Link |
| Transmission type: | COM2 (38,4 kBaud) |
| IO-Link revision: | 1.1 |
| SDCI standard: | IEC 61131-9 |
| IO-Link device ID: | 1132 d / 00 04 6C h |
| Profiles: | Measuring Sensor, Identification and Diagnosis, Switching Signal Channel, Teach Channel |
| SIO mode: | yes |
| Required master port type: | A |
| Min. process cycle time [ms]: | 10 |
| IO-Link process data (cyclical): | function bit length process value 16 device status 4 binary switching information 1 |
| function: | bit length |
| process value: | 16 |
| device status: | 4 |
| binary switching information: | 1 |
| IO-Link functions (acyclical): | application specific tag; operating hours counter; switching cycles counter |
| Note: | For further information please see the IODD PDF file under "Downloads" |
| Ambient temperature [°C]: | -25...80 |
| Storage temperature [°C]: | -40...80 |
| Protection: | IP 67; IP 68; IP 69K |
| EMC: | EN 60947-5-2 |
| MTTF [years]: | 782 |
| UL approval: | Ta -25...80 °C Enclosure type Type 1 voltage supply Class 2 File number UL E174191 |
| Ta: | -25...80 °C |
| Enclosure type: | Type 1 |
| voltage supply: | Class 2 |
| File number UL: | E174191 |
| Weight [K40]: | 78 |
| Housing: | rectangular |
| Dimensions [mm]: | M18 x 1 |
| Thread designation: | M18 x 1 |
| Materials: | 1.4542 (17-4 PH / 630); PEI |
| Lens material: | PEI |
| Display: | switching status 1 x LED, yellow operation 1 x LED, green |
| switching status: | 1 x LED, yellow |
| operation: | 1 x LED, green |
| Accessories (supplied): | lock nut: 1 x |
| Pack quantity: | 1 pcs. |
| Connection: | Connector: 1 x M12 |
| Abstand: | white (90 % remission) |
| 20 mm: | 0.5 mm |
| 50 mm: | 0.8 mm |
| 100 mm: | 1.5 mm |
| 150 mm: | 3.0 mm |
| 200 mm: | 6.0 mm |
| Abstand: | white (90 % remission) |
| 20 mm: | ± 2.0 mm |
| 50 mm: | ± 3.5 mm |
| 100 mm: | ± 6.0 mm |
| 150 mm: | ± 7.5 mm |
| 200 mm: | ± 10.0 mm |
| Extraneous light on the object: | < 10 klx |
| constant ambient conditions: | 23 °C / 960 hPa |
| minimum power-on time in minutes: | 10 |
| ECCN: | |
| Country of Origin: | DE |
| EAN: | |
| Weight: | 0.08 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |