OG5123
Diffuse reflection sensor with background suppression. OGH-HPKG/US/90°/100MM
Particularly space-saving design with light emission on the side. For use where space is restricted. Ready for operation immediately thanks to fixed setting. Simple alignment due to visible red light. Precise background suppression
Type of light: | red light |
Housing: | threaded type |
Dimensions [mm]: | M18 x 1 / L = 65 |
Special feature: | Background suppression |
Function principle: | Diffuse reflection sensor |
Operating voltage [V]: | 10...30 DC; ("supply class 2" to cULus) |
Current consumption [mA]: | 25 |
Protection class: | II |
Reverse polarity protection: | yes |
Type of light: | red light |
Wave length [nm]: | 625 |
Electrical design: | PNP |
Output function: | light-on mode |
Max. voltage drop switching output DC [V]: | 2.5 |
Permanent current rating of switching output DC [mA]: | 200 |
Switching frequency DC [Hz]: | 1000 |
Short-circuit protection: | yes |
Type of short-circuit protection: | pulsed |
Overload protection: | yes |
Range [mm]: | < 100; (white paper 200 x 200 mm 90% remission) |
Range adjustable: | no |
Max. light spot diameter [mm]: | 16 |
Light spot dimensions refer to: | at maximum range |
Background suppression available: | yes |
Ambient temperature [°C]: | -25...60 |
Protection: | IP 68 |
EMC: | EN 60947-5-2 EN 55011 class B |
EN 55011: | class B |
MTTF [years]: | 541 |
Weight [g]: | 57.3 |
Housing: | threaded type |
Dimensions [mm]: | M18 x 1 / L = 65 |
Thread designation: | M18 x 1 |
Materials: | stainless steel; ABS |
Lens material: | PMMA |
Display: | switching status 1 x LED, yellow operation 1 x LED, green |
switching status: | 1 x LED, yellow |
operation: | 1 x LED, green |
Accessories (supplied): | Nuts: 2 lock washers: 2 |
Pack quantity: | 1 pcs. |
Connection: | Connector: 1 x M12 |
ECCN: | |
Country of Origin: | DE |
EAN: | |
Weight: | 0.06 kg |
Length: | 0.00 m |
Width: | 0.00 m |
Height: | 0.00 m |