View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Select language
1-Click Quote Request
Product
Ifm
O5D101
Request a Quote
Ifm O5D101
Photoelectric distance sensor. O5DLCPKG/US
On Request. Please send us an email to inquire the price and avaliability.
"ucnguBrctvdgcxgt0eqo"
Description
Very long range due to time-of-flight measurement. Reliable background suppression and colour-independent detection. With display and pushbuttons for precise switch point setting. Oblique angle to the object possible. Reliable detection of glossy surfaces
Technical parameters
| Type of light: | red light |
| Communication interface: | IO-Link |
| Laser protection class: | 2 |
| Housing: | rectangular |
| Dimensions [mm]: | 56 x 18.2 x 46.8 |
| Special feature: | Background suppression |
| Operating voltage [V]: | 10...30 DC; ("supply class 2" to cULus) |
| Current consumption [mA]: | < 75; (@ 24 V DC) |
| Protection class: | III |
| Reverse polarity protection: | yes |
| Type of light: | red light |
| Wave length [nm]: | 650 |
| Typ. lifetime [h]: | 50000 |
| Number of inputs and outputs: | Number of digital outputs: 2 |
| Total number of outputs: | 2 |
| Electrical design: | PNP |
| Number of digital outputs: | 2 |
| Output function: | normally open / normally closed; (complementary) |
| Max. current load per output [mA]: | 100 |
| Switching frequency DC [Hz]: | 11 |
| Short-circuit protection: | yes |
| Type of short-circuit protection: | pulsed |
| Overload protection: | yes |
| Max. light spot diameter [mm]: | 5 |
| Light spot dimensions refer to: | 2 m |
| Detection range hysteresis [%]: | < 2.5 |
| Note on monitoring range hysteresis: | black 6% remission |
| Background suppression available: | yes |
| Background suppression [m]: | < 20 |
| Measuring range [m]: | 0.03...2 |
| Sampling rate [Hz]: | 33 |
| Communication interface: | IO-Link |
| Transmission type: | COM2 (38,4 kBaud) |
| IO-Link revision: | 1.1 |
| SDCI standard: | IEC 61131-9 |
| IO-Link device ID: | 393d / 00 01 89h |
| Profiles: | Smart Sensor: Sensor Identification; Binary Data Channel; Process Value; Sensor Diagnosis |
| SIO mode: | yes |
| Process data analogue: | 1 |
| Process data binary: | 1 |
| Min. process cycle time [ms]: | 6.6 |
| Ambient temperature [°C]: | -25...60 |
| Note on ambient temperature: | at ta < -10 °C warm-up is necessary, laser is off |
| Protection: | IP 65; IP 67 |
| Max. immunity to extraneous light [klx]: | 10; (on the object) |
| EMC: | EN 60947-5-2 |
| Laser protection class: | 2 |
| Notes on laser protection: | Caution: laser light Power: <= 4,0 mW Wave length: 650 nm pulse: 1,3 ns Do not stare into beam. Avoid exposure to the laser light. laser class: 2 EN / IEC60825-1:2007 EN / IEC60825-1:2014 Complies with 21 CFR 1040 except for deviations pursuant to Laser Notice No. 50, dated June 2007. |
| Caution:: | laser light |
| Power:: | <= 4,0 mW |
| Wave length:: | 650 nm |
| pulse:: | 1,3 ns |
| laser class:: | 2 |
| MTTF [years]: | 151 |
| Weight [K40]: | 77 |
| Housing: | rectangular |
| Dimensions [mm]: | 56 x 18.2 x 46.8 |
| Materials: | housing: PA; bezel: stainless steel; operator interface: TPU; lens: PMMA |
| Lens alignment: | side lens |
| Display: | switching status LED, yellow switching output PIN 4 operation LED, green Display alphanumeric display, 3-digit |
| switching status: | LED, yellow switching output PIN 4 |
| operation: | LED, green |
| Display: | alphanumeric display, 3-digit |
| Display unit: | inch |
| Pack quantity: | 1 pcs. |
| Connection: | Connector: 1 x M12 |
Logistic parameters
| ECCN: | |
| Country of Origin: | DE |
| EAN: | |
| Weight: | 0.08 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |