O4P500
Retro-reflective sensor. O4P-FPKG/US100
Very long range. Sensitivity adjustable via teach buttons. Programmable light-on/dark-on mode. Robust housing for use in harsh industrial environments. With connector that can be rotated by 270°
| Type of light: | red light |
| Housing: | rectangular |
| Dimensions [mm]: | 74.4 x 27 x 63.8 |
| Special feature: | polarisation filter |
| Function principle: | Retro-reflective sensor |
| Operating voltage [V]: | 10...36 DC; ("supply class 2" to cULus) |
| Current consumption [mA]: | 20 |
| Protection class: | II |
| Reverse polarity protection: | yes |
| Type of light: | red light |
| Wave length [nm]: | 624 |
| Electrical design: | PNP |
| Output function: | light-on/dark-on mode; (programmable) |
| Max. voltage drop switching output DC [V]: | 2.5 |
| Permanent current rating of switching output DC [mA]: | 200 |
| Switching frequency DC [Hz]: | 2000 |
| Short-circuit protection: | yes |
| Type of short-circuit protection: | pulsed |
| Overload protection: | yes |
| Range referred to prismatic reflector [m]: | 0.3...22; (Prismatic reflector Ø 80 E20005) |
| Range adjustable: | yes |
| Max. light spot diameter [mm]: | 660 |
| Light spot dimensions refer to: | at maximum range |
| Polarisation filter available: | yes |
| Ambient temperature [°C]: | -25...60 |
| Protection: | IP 67 |
| EMC: | EN 60947-5-2 |
| MTTF [years]: | 434 |
| Weight [g]: | 125 |
| Housing: | rectangular |
| Dimensions [mm]: | 74.4 x 27 x 63.8 |
| Materials: | housing: PA; bezel: stainless steel; operator interface: TPE |
| Lens material: | PMMA |
| Lens alignment: | side lens |
| Display: | switching status 1 x LED, yellow |
| switching status: | 1 x LED, yellow |
| Teach function: | yes |
| Electronic lock: | yes |
| Pack quantity: | 1 pcs. |
| Connection: | Connector: 1 x M12 |
| ECCN: | |
| Country of Origin: | DE |
| EAN: | |
| Weight: | 0.13 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |