MR0107
T-slot cylinder sensor with reed contact. MRT2021BAKOA/R/0,3M/ZH/US
Self-locking fixture for quick mounting and easy adjustment. Easy fit 'drop from the top' into a slot. Moulded cable ensuring very good strain relief. With combined AC/DC output and two-wire technology. Very high switching frequency
Electrical design: | PNP/NPN |
Output function: | normally open |
Dimensions [mm]: | 30.5 x 5 x 6.5 |
Operating voltage [V]: | 5...50 AC / 5...60 DC; (UL supply class 2: 5...60 DC / 5...30 AC) |
Protection class: | III |
Reverse polarity protection: | yes |
Electrical design: | PNP/NPN |
Output function: | normally open |
Max. voltage drop switching output DC [V]: | 5 |
Max. voltage drop switching output AC [V]: | 5 |
Permanent current rating of switching output AC [mA]: | 100; (External protective circuit for inductive load (valve, contactor, etc.) necessary.) |
Permanent current rating of switching output DC [mA]: | 100; (External protective circuit for inductive load (valve, contactor, etc.) necessary.) |
Switching frequency AC [Hz]: | 1000 |
Switching frequency DC [Hz]: | 1000 |
Max. switching power [W]: | 10 |
Short-circuit proof: | no |
Overload protection: | no |
Response sensitivity [mT]: | 2.1 |
Travel speed [m/s]: | 10 |
Hysteresis [mm]: | 1 |
Repeatability [mm]: | -0.2...0.2 |
Max. fall time [ms]: | 0.1 |
Max. make time incl. bounce [ms]: | 0.6 |
Ambient temperature [°C]: | -25...70 |
Protection: | IP 65; IP 67 |
EMC: | EN 61000-4-2 ESD - CD / 8 kV AD EN 61000-4-3 HF radiated 10 V/m EN 61000-4-4 Burst 2 kV EN 61000-4-5 Surge 1 kV line to line, Ri: 2 Ohm EN 61000-4-6 HF conducted 10 V EN 55011 class B |
EN 61000-4-2 ESD: | - CD / 8 kV AD |
EN 61000-4-3 HF radiated: | 10 V/m |
EN 61000-4-4 Burst: | 2 kV |
EN 61000-4-5 Surge: | 1 kV line to line, Ri: 2 Ohm |
EN 61000-4-6 HF conducted: | 10 V |
EN 55011: | class B |
MTTF [years]: | 11303 |
UL approval: | UL Approval no. C004 |
UL Approval no.: | C004 |
Weight [g]: | 21.3 |
Mounting: | flush mountable |
Cylinder type: | T-slot cylinders |
Dimensions [mm]: | 30.5 x 5 x 6.5 |
Materials: | housing: PA; fastening clamp: stainless steel |
Switching cycles when connected to PLC [Mio]: | < 40 |
Display: | switching status 1 x LED, yellow |
switching status: | 1 x LED, yellow |
Required protection: | miniature fuse to IEC60127-2 sheet 1; ≤ 0,175 A; fast acting |
Accessories (supplied): | rubber placeholder: 1 Cable clip: 1 |
Remarks: | No LED function in case of polarity reversal in DC operation. operating voltage "supply class 2" according to UL |
Pack quantity: | 1 pcs. |
ECCN: | |
Country of Origin: | PL |
EAN: | |
Weight: | 0.02 kg |
Length: | 0.00 m |
Width: | 0.00 m |
Height: | 0.00 m |