MN702S
RFID-coded safety sensor. MN38010-BPKG/CB/US
Electrical design: | PNP |
Output function: | 2 x OSSD, 1 x PNP |
Sensing range [mm]: | 12; (with defined actuator) |
Housing: | rectangular |
Dimensions [mm]: | 72 x 18 x 25 |
Design: | codable target |
Type of operation: | permanent operation |
Operating voltage [V]: | 20.4...26.4 DC |
Rated insulation voltage [V]: | 32 |
Operating current [mA]: | 40...700 |
No-load current [mA]: | 30 |
Current consumption [mA]: | < 50 |
Protection class: | III |
Reverse polarity protection: | yes |
Max. power-on delay time [ms]: | 1500 |
Electrical design: | PNP |
Output function: | 2 x OSSD, 1 x PNP |
Max. leakage current [mA]: | 0.5 |
Permanent current rating of switching output DC [mA]: | 50 |
Switching frequency DC [Hz]: | 1 |
Output data: | interface type C class 2 |
Short-circuit protection: | yes |
Overload protection: | yes |
Max. capacitive load CL_max [nF]: | 200 |
Sensing range [mm]: | 12; (with defined actuator) |
Safe switching-off distance s(ar) [mm]: | 16 |
Hysteresis [%]: | 20 |
Repeatability analogue output [%]: | ≤ 10; (% Sn) |
Response time to safety request [ms]: | 160 |
Response time when approaching the enable zone [ms]: | 600 |
Risk time (response time for safety-related faults) [ms]: | 10 |
Applications: | class C to EN 60654-1 weatherproof application |
Ambient temperature [°C]: | -25...70 |
Note on ambient temperature: | operational life ≤ 87600 h |
Ambient temperature [°C]: | 10...40 |
Note on ambient temperature: | operational life ≤ 175200 h |
Max. relative air humidity [%]: | briefly: 5...95 %; permanent: 5...70 % |
Air pressure [kPa]: | 80...106 |
Max. height above sea level [m]: | 2000 |
Ionising radiation: | not permissible |
Salt spray: | no |
Protection: | IP 67; IP 69K; (protected cable laying) |
EMC: | IEC 60947-5-3 |
Shock resistance: | EN 60068-2-27 30 g (11 ms) |
EN 60068-2-27: | 30 g (11 ms) |
Vibration resistance: | IEC 60068-2-6 10 g (10...55 Hz) |
IEC 60068-2-6: | 10 g (10...55 Hz) |
ISO 13849-1: | category 4, PL e |
IEC 62061: | SIL cl 3 |
Mission time TM [h]: | ≤ 175200 |
Mission time TM (additional indication): | 20 years |
Safety-related reliability PFHD [1/h]: | 1.5E-09 |
Weight [g]: | 177.5 |
Housing: | rectangular |
Mounting: | non-flush mountable |
Dimensions [mm]: | 72 x 18 x 25 |
Materials: | PA; plug: stainless steel (1.4301 / 304) |
Tightening torque [Nm]: | 0.8...2 |
Display: | function 1 x LED, (ACT) input 1 x LED, (IN) Output 1 x LED, (OUT) operation 1 x LED, (PWR) |
function: | 1 x LED, (ACT) |
input: | 1 x LED, (IN) |
Output: | 1 x LED, (OUT) |
operation: | 1 x LED, (PWR) |
Accessories (supplied): | codable target washers: 4 cover caps: 8 |
Pack quantity: | 1 pcs. |
Connection: | Connector: 1 x M12 |
ECCN: | |
Country of Origin: | IT |
EAN: | |
Weight: | 0.18 kg |
Length: | 0.00 m |
Width: | 0.00 m |
Height: | 0.00 m |