MN201S
Magnetically coded sensor. MN14005-AKOG/6m/-H
Actuation possible from different directions. Conceal behind stainless steel for enhanced tamper prevention. Meets the new interface description CB24I from ZVEI. Meets highest safety levels to ISO 13849-1 and SILCL 3 to IEC 62061
| Output function: | 2 x normally open |
| Sensing range [mm]: | 5; (with defined actuator) |
| Housing: | rectangular |
| Dimensions [mm]: | 36 x 13 x 26 |
| Design: | coded target |
| Type of operation: | permanent operation |
| Operating voltage [V]: | 24 DC |
| Rated insulation voltage [V]: | 60 |
| Protection class: | III |
| Reverse polarity protection: | no |
| Internal resistance (Ri) [Ω]: | 10; (1 W) |
| Output function: | 2 x normally open |
| Permanent current rating of switching output DC [mA]: | 50 |
| Switching frequency DC [Hz]: | 150 |
| Output data: | Interface type A |
| Short-circuit proof: | no |
| Max. capacitive load CL_max [nF]: | 20 |
| Sensing range [mm]: | 5; (with defined actuator) |
| Safe switching-off distance s(ar) [mm]: | 15 |
| Response time to safety request [ms]: | 10 |
| Max. fall time [ms]: | 0.1 |
| Max. make time incl. bounce [ms]: | 0.6 |
| Applications: | class C to EN 60654-1 weatherproof application |
| Ambient temperature [°C]: | -25...80 |
| Ambient temperature [°C]: | 10...40 |
| Note on ambient temperature: | operational life ≤ 175200 h |
| Max. relative air humidity [%]: | briefly: 5...95 %; permanent: 5...70 % |
| Air pressure [kPa]: | 80...106 |
| Max. height above sea level [m]: | 2000 |
| Salt spray: | no |
| Protection: | IP 67; IP 69K; (protected cable laying) |
| EMC: | IEC 60947-5-1 |
| Shock resistance: | EN 60068-2-27 30 g (11 ms) |
| EN 60068-2-27: | 30 g (11 ms) |
| Vibration resistance: | IEC 60068-2-6 10 g (10...55 Hz) |
| IEC 60068-2-6: | 10 g (10...55 Hz) |
| Mission time TM [h]: | ≤ 175200 |
| Mission time TM (additional indication): | 20 years |
| B10D: | 20.000.000; (without load; at max. load DC 12, 24 V, 50 mA : 400.000) |
| Weight [g]: | 405.5 |
| Housing: | rectangular |
| Mounting: | non-flush mountable |
| Dimensions [mm]: | 36 x 13 x 26 |
| Materials: | PA |
| Tightening torque [Nm]: | 0.8...2 |
| Accessories (supplied): | coded target cover caps : 4 |
| Remarks: | In connection with a G150xS / AC4x2S type evaluation unit, it is possible to reach up to PL e (ISO 13849-1) or SIL cl 3 (IEC 62061) |
| Pack quantity: | 1 pcs. |
| Connection: | Cable: 6 m, PVC, Ø 5 mm; 4 x 0.25 mm² |
| ECCN: | |
| Country of Origin: | IT |
| EAN: | |
| Weight: | 0.41 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |