View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Select language
1-Click Quote Request
Product
Ifm
KQ1000
Request a Quote
Ifm KQ1000
Electronic level sensor. KQ-5xxxNFPKG/IO
On Request. Please send us an email to inquire the price and avaliability.
"ucnguBrctvdgcxgt0eqo"
Description
Continuously measuring level from outside. No stress caused by the medium thanks to non-contact detection. Three point level sensors in one unit. Deposits can be detected and signalled to improve quality of the process. Linking several KQ10 via IO-Link
Technical parameters
| Electrical design: | PNP/NPN; (parameterisable) |
| Communication interface: | IO-Link |
| Dimensions [mm]: | 250 x 28 x 16.7 |
| Media: | dry bulk material; aqueous solutions; oils |
| Cannot be used for: | highly adhesive media |
| Operating voltage [V]: | 10...30 DC; (IO-Link: 18...30 DC) |
| Current consumption [mA]: | < 50 |
| Protection class: | III |
| Reverse polarity protection: | yes |
| Max. power-on delay time [ms]: | 1300 |
| Number of inputs and outputs: | Number of digital outputs: 3 |
| Electrical design: | PNP/NPN; (parameterisable) |
| Number of digital outputs: | 3 |
| Permanent current rating of switching output DC [mA]: | 200 |
| Max. resistance switching output [Ω]: | 8 |
| Short-circuit protection: | yes |
| Type of short-circuit protection: | pulsed |
| Overload protection: | yes |
| Measuring range [mm]: | < 200 |
| Detection range [mm]: | 228 |
| Set point SP [%]: | 5...95 |
| Reset point rP [%]: | 4...94 |
| In steps of [%]: | 1 |
| Repeatability [% of the final value]: | 2 |
| Offset deviation [% of the final value]: | 4 |
| Resolution [% of the final value]: | 1 |
| Linearity deviation [% of the final value]: | 1 |
| Response time [ms]: | 1300 |
| Communication interface: | IO-Link |
| Transmission type: | COM2 (38,4 kBaud) |
| IO-Link revision: | 1.1 |
| SDCI standard: | IEC 61131-9 |
| Profiles: | Digital Measuring Sensor Profile, Common Profile |
| SIO mode: | yes |
| Required master port type: | A |
| Process data analogue: | 1 |
| Process data binary: | 3 |
| Min. process cycle time [ms]: | 9.6 |
| IO-Link process data (cyclical): | function bit length process value 16 exponent 8 device status 4 binary switching information 3 |
| function: | bit length |
| process value: | 16 |
| exponent: | 8 |
| device status: | 4 |
| binary switching information: | 3 |
| IO-Link functions (acyclical): | direction of installation; limitation of sensor elements; sensitivity; minimum recognition threshold; Performance in case of a fault; error delay; Damping; LED_Modus; switch-on cycle counter; operating hours counter; switching cycles counter; min./max. process value; internal temperature; min./max. internal temperature; diagnostic data for level |
| Supported DeviceIDs: | Type of operation IO-Link device ID Default 924 d / 00 03 9C h |
| Type of operation: | IO-Link device ID |
| Default: | 924 d / 00 03 9C h |
| Note: | For further information please see the IODD PDF file under "Downloads" |
| Applications: | DIN EN 60654-1 application class B2 |
| Ambient temperature [°C]: | -20...80 |
| Storage temperature [°C]: | -25...85 |
| Protection: | IP 65; IP 67 |
| EMC: | DIN EN 61000-6-4 30 - 230 MHz 40 dBµV/m QP / 10 m distance 230 - 1 GHz 47 dBµV/m QP / 10 m distance DIN EN 61000-4-2 ± 25 kV AD / ± 25 kV CD DIN EN 61000-4-3 80 MHz - / 1 GHz 10 V/m DIN EN 61000-4-4 ± 2.5 kV / 5 kHz ± 2.5 kV / 100 kHz DIN EN 61000-4-6 10 V |
| DIN EN 61000-6-4 30 - 230 MHz: | 40 dBµV/m QP / 10 m distance |
| 230 - 1 GHz: | 47 dBµV/m QP / 10 m distance |
| DIN EN 61000-4-2: | ± 25 kV AD / ± 25 kV CD |
| DIN EN 61000-4-3: | 80 MHz - / 1 GHz 10 V/m |
| DIN EN 61000-4-4: | ± 2.5 kV / 5 kHz |
| DIN EN 61000-4-6: | 10 V |
| Shock resistance: | EN 60068-2-27 15 g / 11 ms |
| EN 60068-2-27: | 15 g / 11 ms |
| Vibration resistance: | EN 60068-2-6 5 g (10...2000 Hz) |
| EN 60068-2-6: | 5 g (10...2000 Hz) |
| MTTF [years]: | 290.43 |
| UL approval: | Ta -25...60 °C Enclosure type Type 1 voltage supply Limited Voltage/Current UL Approval no. D005 File number UL E174191 |
| Ta: | -25...60 °C |
| Enclosure type: | Type 1 |
| voltage supply: | Limited Voltage/Current |
| UL Approval no.: | D005 |
| File number UL: | E174191 |
| Weight [g]: | 432 |
| Dimensions [mm]: | 250 x 28 x 16.7 |
| Materials: | PBT; PC; |
| Display: | operation 1 x LED, green switching status 3 x LED, yellow function 20 x LED, green |
| operation: | 1 x LED, green |
| switching status: | 3 x LED, yellow |
| function: | 20 x LED, green |
| Accessories (supplied): | adhesive tape: 1 x 1,2 x 23 x 240 mm |
| Accessories (optional): | Mounting adapter:, E12675 Mounting adapter:, E12676 Fixing strap:, E10880 |
| Remarks: | when used on IO-Link class B masters switching outputs OUT2, OUT3 have to be switched off |
| Pack quantity: | 1 pcs. |
| Connection: | Cable: 2 m, PUR; 5 x 0.34 mm² |
Logistic parameters
| ECCN: | |
| Country of Origin: | DE |
| EAN: | |
| Weight: | 0.43 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |