KI8509
Capacitive sensor. KI-2015-BBOA/NI/HUBBELL
Easy setting of the sensing range via potentiometer. With combined AC/DC output stage. Two-wire technology. High noise immunity. Clearly visible indication of the switching status
Output function: | normally closed |
Sensing range [mm]: | 3...15 |
Housing: | threaded type |
Dimensions [mm]: | M30 x 1.5 / L = 81 |
Operating voltage [V]: | 20...125 AC/DC |
Protection class: | II |
Reverse polarity protection: | no |
Max. power-on delay time [ms]: | 300 |
Output function: | normally closed |
Max. voltage drop switching output DC [V]: | 8 |
Max. voltage drop switching output AC [V]: | 10 |
Minimum load current [mA]: | 5 |
Max. leakage current [mA]: | 1.7 (125 V AC) / 1.5 (24 V DC) |
Permanent current rating of switching output AC [mA]: | 200; (>70°C; 250 mA: >50°C) |
Permanent current rating of switching output DC [mA]: | 200; (>70°C; 250 mA: >50°C) |
Short-time current rating of switching output [mA]: | 2200; (20 ms / 0,5 Hz) |
Switching frequency AC [Hz]: | 25 |
Switching frequency DC [Hz]: | 40 |
Short-circuit proof: | no |
Overload protection: | no |
Sensing range [mm]: | 3...15 |
Sensing range adjustable: | yes |
Factory setting sensing range [mm]: | 15 |
Real sensing range Sr [mm]: | 15 ± 10 % |
Operating distance [mm]: | 0...12.1 |
Correction factor: | glass: 0.4 / water: 1 / ceramics: 0.2 / PVC: 0.2 |
Hysteresis [% of Sr]: | 1...15 |
Switch point drift [% of Sr]: | -15...15 |
Ambient temperature [°C]: | -25...70 |
Protection: | IP 65 |
Increased immunity: | yes; (increased immunity to conducted radio frequency interference) |
EMC: | EN 60947-5-2 |
Weight [g]: | 193.2 |
Housing: | threaded type |
Mounting: | non-flush mountable |
Dimensions [mm]: | M30 x 1.5 / L = 81 |
Thread designation: | M30 x 1.5 |
Materials: | PBT |
Display: | switching status 1 x LED, yellow |
switching status: | 1 x LED, yellow |
Required protection: | miniature fuse to IEC60127-2 sheet 1; ≤ 2 A; fast acting |
Accessories (supplied): | lock nuts: 2 screwdriver: 1 |
Remarks: | Recommendation: Check the safe functioning of the unit after a short circuit. The requirements regarding the protection rating of the connection / connector are to be checked and ensured by the user |
Pack quantity: | 1 pcs. |
Connection: | Cable: 2 m, PVC; 2 x 0.5 mm² |
Connection: | Connector: 1 x Hubbell (HBL7465V) |
ECCN: | |
Country of Origin: | DE |
EAN: | |
Weight: | 0.19 kg |
Length: | 0.00 m |
Width: | 0.00 m |
Height: | 0.00 m |