IN5417
Inductive sensor. INE3004DBPKG/PLUG M12/SOCKET M12
| Electrical design: | PNP |
| Output function: | 2 x normally open |
| Sensing range [mm]: | 4 |
| Housing: | rectangular |
| Dimensions [mm]: | 33 x 60 x 92 |
| Operating voltage [V]: | 10...30 DC; (to PELV) |
| Current consumption [mA]: | 15; (a maximum of one output is switched) |
| Protection class: | III |
| Reverse polarity protection: | yes |
| Electrical design: | PNP |
| Output function: | 2 x normally open |
| Max. voltage drop switching output DC [V]: | 2.5 |
| Permanent current rating of switching output DC [mA]: | 100 |
| Switching frequency DC [Hz]: | 500 |
| Short-circuit protection: | yes |
| Type of short-circuit protection: | pulsed |
| Overload protection: | yes |
| Valve control: | 24 (< 20 W) |
| Sensing range [mm]: | 4 |
| Real sensing range Sr [mm]: | 4 ± 10 % |
| Operating distance [mm]: | 0...3.25 |
| Correction factor: | steel: 1 / stainless steel: 0.7 / brass: 0.5 / aluminium: 0.4 / copper: 0.3 |
| Hysteresis [% of Sr]: | 1...15 |
| Switch point drift [% of Sr]: | -10...10 |
| Ambient temperature [°C]: | -25...80 |
| Protection: | IP 67 |
| EMC: | EN 60947-5-2 EN 55011 class B |
| EN 55011: | class B |
| Weight [g]: | 205.5 |
| Housing: | rectangular |
| Mounting: | non-flush mountable |
| Dimensions [mm]: | 33 x 60 x 92 |
| Materials: | housing: PA; screws: stainless steel; washer: stainless steel |
| Tightening torque [Nm]: | 1.8; (Mounting screw) |
| Display: | switching status 2 x LED, yellow |
| switching status: | 2 x LED, yellow |
| Accessories (supplied): | washers: 2 cylinder screws: 2 x M5 x 18 |
| Pack quantity: | 1 pcs. |
| Connection: | Connector: 1 x M12 |
| ECCN: | |
| Country of Origin: | DE |
| EAN: | |
| Weight: | 0.21 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |