DN0210
Switching amplifier. N200/SA-1 110-240VAC
Reliable switching of high currents or alternating currents. Integrated wide-range power supply for the sensor supply. Particularly space-saving design. Plug-in screw terminals simplify installation. With PNP or NPN control
Housing: | housing for DIN rail mounting |
Application: | Power supply and signal evaluation |
Nominal voltage AC [V]: | 110...240 |
Nominal voltage tolerance [%]: | > 20 |
Nominal voltage tolerance 2 [%]: | 20...10 |
Nominal frequency AC [Hz]: | 50...60 |
Insulation rating [V]: | 9 |
Max. power consumption AC [W]: | 11 |
Auxiliary energy for sensors DC [V]: | 24; (SELV, ± 10 %, 300 mA) |
Number of channels: | 1 |
Number of inputs and outputs: | Number of relay outputs: 1 |
Number of relay outputs: | 1 |
Contact rating: | 4 A (240 V AC, 24 V DC); (ohmic resistance) |
Ambient temperature [°C]: | -20...60 |
Storage temperature [°C]: | -25...70 |
Max. relative air humidity [%]: | 80; (40 °C: 50 % non condensing) |
Max. height above sea level [m]: | 3000 |
Protection: | IP 20 |
Protection rating terminals: | IP 20 |
Degree of soiling: | 2; (≤ 240 V AC) |
MTTF [years]: | 290 |
Weight [g]: | 214 |
Housing: | housing for DIN rail mounting |
Type of mounting: | rail; (TH35 EN 60715) |
Materials: | plastics: PC-GF20 |
Display: | voltage supply 1 x LED, green Output 1 x LED, yellow errors 1 x LED, red |
voltage supply: | 1 x LED, green |
Output: | 1 x LED, yellow |
errors: | 1 x LED, red |
Accessories (supplied): | connector: 3 x 4-wire, with screw connection |
Connection: | pin headers: 4 x ; Spacing: 5.0 mm |
ECCN: | |
Country of Origin: | DE |
EAN: | |
Weight: | 0.21 kg |
Length: | 0.00 m |
Width: | 0.00 m |
Height: | 0.00 m |