AL1930
IO-Link master with EtherCAT interface. IO-Link Master CL EC 8P IP20
Separation between automation network and IT network. For connection of up to eight IO-Link devices. Reliable transmission of machine data, process parameters and diagnostic data to the controller. With EtherCat interface and separate MQTT JSON interface. Small design requiring only very little space for control panel mounting
Application: | I/O modules for use in the control cabinet |
Operating voltage [V]: | 20...30 DC; (US; to SELV/PELV) |
Current consumption [mA]: | 300...3900; (US) |
Protection class: | III |
Max. current load total [A]: | 3.6 |
Total number of inputs and outputs: | 16; (configurable) |
Number of inputs and outputs: | Number of digital inputs: 8; Number of digital outputs: 8 |
Number of digital inputs: | 8; (IO-Link Port Class A) |
Switching level high [V]: | 11...30 |
Switching level low [V]: | 0...5 |
Digital inputs protected against short circuits: | yes |
Number of digital outputs: | 8; (IO-Link Port Class A) |
Max. current load per output [mA]: | 300 |
Short-circuit proof: | yes |
Communication interface: | Ethernet; IO-Link |
Note on interfaces: | Secure protocol; HTTPS |
Transmission standard: | 10Base-T; 100Base-TX |
Transmission rate: | 10; 100 |
Protocol: | EtherCAT |
Factory settings: | MAC address: see type label |
Transmission standard: | 10Base-T; 100Base-TX |
Transmission rate: | 10; 100 |
Protocol: | MQTT JSON |
Factory settings: | IP address: 169.254.x.x subnet mask: 255.255.0.0 gateway IP address: 0.0.0.0 MAC address: see type label |
Transmission type: | COM1 (4,8 kBaud); COM2 (38,4 kBaud); COM3 (230,4 kBaud) |
IO-Link revision: | 1.1 |
Number of ports class A: | 8 |
Ambient temperature [°C]: | -25...65 |
Storage temperature [°C]: | -25...85 |
Max. relative air humidity [%]: | 90 |
Protection: | IP 20 |
EMC: | EN 61000-6-2 EN 61000-6-4 |
MTTF [years]: | 90 |
Weight [g]: | 330.5 |
Materials: | housing: PA |
Accessories (supplied): | COMBICON connectors: 9 |
Remarks: | For further information please see the operating instructions. |
Pack quantity: | 1 pcs. |
EtherCat X21, X22: | Connector: RJ45 |
ECCN: | |
Country of Origin: | DE |
EAN: | |
Weight: | 0.33 kg |
Length: | 0.00 m |
Width: | 0.00 m |
Height: | 0.00 m |