View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Select language
1-Click Quote Request
Product
Ifm
AC542A
Request a Quote
Ifm AC542A
AS-Interface Airbox with quick mounting technology. AirBox 2x3/2 4DI-Y II 3D
On Request. Please send us an email to inquire the price and avaliability.
"ucnguBrctvdgcxgt0eqo"
Description
For the decentralised triggering of cylinders and valve actuators. Combination of AS-i I/O module and solenoid valve. High energy efficiency due to decentralised application near the actuator. Reduced installation and wiring complexity. Easy toolless installation and wiring thanks to quick mounting technology
Technical parameters
| Operating voltage [V]: | 26.5...31.6 DC |
| Max. current consumption from AS-i [mA]: | 280 |
| Integrated watchdog: | yes |
| Number of inputs and outputs: | Number of digital inputs: 4; Number of pneumatic outputs: 2 |
| Number of digital inputs: | 4 |
| Input circuit of digital inputs: | PNP |
| Sensor supply of the inputs: | AS-i |
| Voltage supply [V]: | 20...30; (via flat cable) |
| Max. total current rating of inputs [mA]: | 200 |
| Input current High [mA]: | 6...10 |
| Input current Low [mA]: | 0...2 |
| Min. switching level high signal [V]: | 11 |
| Digital inputs protected against short circuits: | yes |
| Electrical design: | AS-i |
| Number of pneumatic outputs: | 2 |
| Ambient temperature [°C]: | -10...50 |
| Protection: | IP 50 |
| ATEX marking: | II 3D Ex tc IIIB T80°C Dc X IP50 |
| EMC: | EN 50295 |
| MTTF [years]: | 288 |
| AS-i version: | 2.11; 3.0 |
| AS-i addressing: | addressing socket |
| Extended addressing mode possible: | no |
| AS-i profile: | S-7.F.F |
| AS-i I/O configuration [hex]: | 7 |
| AS-i ID code [hex]: | F.F |
| AS-i certificate pending: | yes |
| Assignment of the data bits: | data bit D0 D1 D2 D3 input 1 2 3 4 socket I-1/2 I-1/2 / I-2 I-3/4 I-3/4 / I-4 pin 4 2 4 4 2 4 pneumatic output - - 2 4 |
| data bit: | D0 |
| input: | 1 |
| socket: | I-1/2 |
| pin: | 4 |
| pneumatic output: | - |
| Weight [g]: | 417.5 |
| Type of mounting: | AS-i flat cables directly connectable |
| Materials: | PA; POM; piercing contacts: CuSn6 nickel-plated and tin-plated |
| Pneumatic system: | 2 x 3/2-way slide valves (free from overlapping) |
| Operating pressure range [bar]: | 2...8 |
| Operating pressure range [MPa]: | 0.2...0.8 |
| Air flow at 6/5 bar [l/min]: | 500 |
| Permissible compressed air: | non-lubricated compressed air class 6-3-1; lubricated compressed air class 6-3-4 |
| Manual override: | pressing/releasing or pressing/turning/locking |
| Tube fittings: | 8 mm |
| Exhaust: | exhaust can be discharged through tube connection |
| Display: | operation LED, green errors LED, red function LED, yellow |
| operation: | LED, green |
| errors: | LED, red |
| function: | LED, yellow |
| Accessories (supplied): | lower part |
| Accessories (optional): | Mounting plate:, E74999 Module lower part:, E75000 Protective cap: M12, E73004 sealing plugs:, E75231 Impact protection housing:, E7000A silencer:, E75232 Push-in L-fitting:, E75228 Push-in T-fitting:, E75227 |
| Remarks: | Mechanical protection has to be implemented. Otherwise the unit must be installed together with the impact protection housing (E7000A). If not pneumatically operated, E75231 sealing plug must be inserted. Avoid ingress of dirt and dust. Do not connect any of the following points to an external potential: L-, L+, I-1, I-2, I-3, I-4 The connections are electrically connected with the AS-i cable. Notes on compressed air and EMC/ESD at www.ifm.com |
| Pack quantity: | 1 pcs. |
| Connection: | quick mounting technology for AS-i flat cable: ; three orientations possible |
| Connection: | Connector: M12 |
Logistic parameters
| ECCN: | |
| Country of Origin: | DE |
| EAN: | |
| Weight: | 0.42 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |