View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Select language
1-Click Quote Request
Product
Ifm
AC5230
Request a Quote
Ifm AC5230
AS-Interface ClassicLine module with quick mounting technology. ClassicLine 1AI C 1AO C 2DI
On Request. Please send us an email to inquire the price and avaliability.
"ucnguBrctvdgcxgt0eqo"
Description
Easy toolless installation and wiring thanks to quick mounting technology. Three freely selectable directions of the flat cable. Clearly visible powerful LEDs for displaying operation, switching status and error. High protection rating for the requirements of harsh industrial environments. Robust M12 connectors for connecting sensors and actuators
Technical parameters
| Number of inputs and outputs: | Number of digital inputs: 2; Number of analogue inputs: 1; Number of analogue outputs: 1 |
| Application: | only for operation with AS-i masters with the profile M4 |
| Operating voltage [V]: | 26.5...31.6 DC; ("supply class 2" to cULus) |
| Max. current consumption from AS-i [mA]: | 250 |
| Reverse polarity protection: | yes |
| Max. current load total [A]: | 0.2 |
| Number of inputs and outputs: | Number of digital inputs: 2; Number of analogue inputs: 1; Number of analogue outputs: 1 |
| Number of digital inputs: | 2 |
| Number of analogue inputs: | 1 |
| Input circuit of digital inputs: | PNP |
| Sensor supply of the inputs: | AS-i |
| Voltage supply [V]: | 18...30 |
| Analogue input (current) [mA]: | 4...20 |
| Max. voltage drop across load for nominal voltage [V]: | 10 |
| Analogue inputs protected against short circuits: | yes |
| Resolution of analogue input: | 12 bit |
| Number of analogue outputs: | 1 |
| Analogue current output [mA]: | 4...20 |
| Max. voltage drop across load for nominal current [V]: | 10 |
| Resolution of analogue output: | 12 bit |
| Actuator supply analogue outputs: | AS-i |
| Measuring error [% of the final value]: | 0,5 |
| Ambient temperature [°C]: | -25...70 |
| Protection: | IP 67 |
| EMC: | EN 50295 IEC 61000-6-2 |
| MTTF [years]: | 137 |
| AS-i version: | 3.0 |
| Extended addressing mode possible: | no |
| AS-i profile: | S-7.5.5 |
| AS-i I/O configuration [hex]: | 7 |
| AS-i ID code [hex]: | 5.5 |
| Assignment of the parameter bits: | parameter bit function P0 watchdog analogue output : 1 activated * / 0 deactivated P1 peripheral fault indication analogue input : 1 activated * / 0 deactivated P2 peripheral fault indication analogue output : 1 activated * / 0 deactivated P3 not used : 1 default value |
| parameter bit: | function |
| P0: | watchdog analogue output |
| P1: | peripheral fault indication analogue input |
| P2: | peripheral fault indication analogue output |
| P3: | not used |
| Weight [g]: | 198 |
| Materials: | PA; piercing contacts: CuSn6 nickel-plated and tin-plated |
| Display: | operation LED, green errors LED, red function LED, yellow |
| operation: | LED, green |
| errors: | LED, red |
| function: | LED, yellow |
| Accessories (supplied): | lower part |
| Accessories (optional): | Protective cap: M12, E73004 |
| Remarks: | 3-wire connection possible via external link. The actuator supply on pins 1 and 3 can be used to supply the sensors / actuators. In this case, an electrical isolation to AS-i is not given. The analogue inputs and outputs (pins 2 and 4) are electrically separated and have no connection to AS-i. Do not connect any of the following points to an external potential: I-1/2, I-2, Pin 1, Pin 3 |
| Pack quantity: | 1 pcs. |
| Connection: | Connector: M12; Maximum cable length: 30 m |
Logistic parameters
| ECCN: | |
| Country of Origin: | DE |
| EAN: | |
| Weight: | 0.20 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |