AC3204
AS-Interface control cabinet module. SmartL25 4 DI AUX T C
For use in control cabinets. Simple and fast wiring by means of cage clamps. Particularly space-saving design. Double terminals for looping through the voltage supply. Clearly visible powerful LEDs for displaying operation, switching status and function
Operating voltage [V]: | 18...31.6 DC |
Max. current consumption from AS-i [mA]: | 30 |
Additional voltage supply [V]: | 20...30 DC; (AUX) |
Max. current consumption from additional supply [mA]: | 1100; (AUX) |
Number of inputs and outputs: | Number of digital inputs: 4 |
Number of digital inputs: | 4 |
Input circuit of digital inputs: | PNP; (type 2 according to IEC 61131-2) |
Sensor supply of the inputs: | via E+/E- / separate to SELV / AUX |
Voltage supply [V]: | 16...30; (DC) |
Max. total current rating of inputs [mA]: | 1000 |
Input current High [mA]: | 6...10 |
Input current Low [mA]: | 0...2 |
Min. switching level high signal [V]: | 11 |
Digital inputs protected against short circuits: | yes |
Ambient temperature [°C]: | -25...65 |
Max. relative air humidity [%]: | 90; (non condensing) |
Max. height above sea level [m]: | 2000 |
Protection: | IP 20 |
Protection rating terminals: | IP 20 |
Degree of soiling: | 2 |
EMC: | EN 62026-2 EN 61000-6-2 EN 61000-6-3 |
MTTF [years]: | 336 |
Notes: | The device shall be supplied from an isolating source.; This voltage source must have a secondary UL-listed fuse (see enclosed sheet).; Alternatively, a class 2 power supply can be used to supply AUX. |
AS-i version: | 2.11; 3.0 |
AS-i addressing: | addressing socket |
Extended addressing mode possible: | yes |
AS-i profile: | S-0.A.E |
AS-i I/O configuration [hex]: | 0 |
AS-i ID code [hex]: | A.E |
AS-i certificate: | 124404 |
Assignment of the data bits: | data bit D0 D1 D2 D3 input I-1 I-2 I-3 I-4 |
data bit: | D0 |
input: | I-1 |
Weight [g]: | 133 |
Type of mounting: | mounting on DIN rail |
Materials: | plastics; PC-GF20 |
Display: | switching status LED, yellow I1...I4 operation LED, green AS-i, AUX errors LED, red |
switching status: | LED, yellow I1...I4 |
operation: | LED, green AS-i, AUX |
errors: | LED, red |
Accessories (supplied): | cage clamps |
Pack quantity: | 1 pcs. |
Connection: | pin headers: 4 x ; Spacing: 5.0 mm |
ECCN: | |
Country of Origin: | DE |
EAN: | |
Weight: | 0.13 kg |
Length: | 0.00 m |
Width: | 0.00 m |
Height: | 0.00 m |