AC2728
AS-Interface module for valve heads. Valvehead module 4DI 3DO T
For installation in small housings, control cabinets and operator panels. Simple and fast wiring by means of wire strands. Particularly space-saving design. For integration of mechanical switches into AS-i networks. Suitable for use in valve heads due to full potting
| Operating voltage [V]: | 26.5...31.6 DC |
| Current consumption [mA]: | < 200 |
| Max. current load total [A]: | 0.18 |
| Integrated watchdog: | yes |
| Number of inputs and outputs: | Number of digital inputs: 4; Number of digital outputs: 3 |
| Number of digital inputs: | 4 |
| Sensor supply of the inputs: | AS-i |
| Voltage supply [V]: | 20...30 |
| Digital inputs protected against short circuits: | yes |
| Number of digital outputs: | 3 |
| Voltage range DC [V]: | AS-i |
| Max. current load per output [mA]: | 100; (note current load for all inputs and outputs ) |
| Short-circuit proof: | yes |
| Ambient temperature [°C]: | -25...70 |
| Protection: | IP 00 |
| EMC: | EN 50295 |
| AS-i version: | 2.1 |
| Extended addressing mode possible: | yes |
| AS-i profile: | S-7.A.F |
| AS-i I/O configuration [hex]: | 7 |
| AS-i ID code [hex]: | A.F |
| Assignment of the data bits: | data bit D0 D1 D2 D3 input I-1 I-2 I-3 I-4 Output O-1 O-2 O-3 - |
| data bit: | D0 |
| input: | I-1 |
| Output: | O-1 |
| Weight [g]: | 74.5 |
| Housing: | potted plastic housing |
| Dimensions [mm]: | 16 x 88 x 41 |
| Remarks: | The AS-i module is a PCB solution for an AS-i slave, supply via AS-i. A watchdog function switches the outputs off if there is no communication on the AS-i line. |
| Pack quantity: | 1 pcs. |
| ECCN: | |
| Country of Origin: | DE |
| EAN: | |
| Weight: | 0.07 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |