KL2701
KL2701 | 1-channel solid state load relay up to 230 V AC/DC, 3 A
The KL2701 output terminal uses an electronic load relay to switch a mains voltage of up to 230 V AC/DC with an output current of 3 A. The switching element is a high-power MOSFET, which is connected to the power contact potential. As a semiconductor switch, it is not subject to wear. The KL2701 terminal has one independent output. Its signal state is indicated by means of a light emitting diode.
| Connection technology: | 2-/3-/4-wire |
| Number of outputs: | 1 x make contact |
| Nominal voltage: | 0…230 V AC/DC |
| Load type: | ohmic, inductive |
| Max. output current: | 3 A steady load |
| Surge voltage protection: | from 400 V AC |
| Peak current: | 5 A (20 s), 50 A (100 ms) |
| Switching current: | peak current: 5 A (20 s), 50 A (100 ms) |
| Recommended fuse: | ≤ 10 A fast fuse |
| Contact resistance: | 0.1 Ω typ. |
| Switch-off time: | 2…4 ms |
| Max. residual voltage: | (100 mΩ) |
| Electrical isolation: | 500 V (K-bus/field voltage), 2500 V AC (1 min.) |
| Leakage current (OFF state): | << 1 mA |
| Switching speed: | typ. 1.65 ms, 5 ms max. |
| Current consumption power contacts: | only leakage and load current |
| Current consumption K-bus: | typ. 65 mA |
| Bit width in the process image: | 2 outputs |
| Configuration: | no address or configuration setting |
| Weight: | approx. 55 g |
| Operating/storage temperature: | 0…+55 °C/-25…+85 °C |
| Relative humidity: | 95 %, no condensation |
| Vibration/shock resistance: | conforms to EN 60068-2-6/EN 60068-2-27 |
| EMC immunity/emission: | conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. class/installation pos.: | IP 20/variable |
| Pluggable wiring: | for all KSxxxx Bus Terminals |
| Approvals: | CE |
| ECCN: | |
| Country of Origin: | |
| EAN: | |
| Weight: | 0.00 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |