EK1501-0010
EK1501-0010 | EtherCAT Coupler with ID switch, fibre optic
The EK1501-0010 coupler connects EtherCAT with the EtherCAT Terminals (ELxxxx). A station consists of an EK1501-0010 coupler, any number of EtherCAT Terminals, an EL9011 bus end cap or an EK1110 EtherCAT extension. The coupler converts the passing telegrams from Ethernet 100BASE-FX to E-bus signal representation. The singlemode glass fibre connection enables distances of up to 20 km between two couplers.
| Task within EtherCAT system: | coupling of EtherCAT Terminals (ELxxxx) to 100BASE-FX EtherCAT networks, with identity verification |
| Data transfer medium: | singlemode glass fibre 9/125 µm (SM) |
| Distance between stations: | max. 20,000 m (100BASE-FX) |
| Number of EtherCAT Terminals: | up to 65,534 |
| Type/number of peripheral signals: | max. 4.2 GB addressable I/O points |
| Number of configurable IDs: | 4096 |
| Protocol: | EtherCAT |
| Delay: | approx. 1 µs |
| Data transfer rates: | 100 Mbit/s |
| Configuration: | not required |
| Bus interface: | 2 x SC Duplex |
| Power supply: | 24 V DC (-15 %/+20 %) |
| Input current: | 150 mA + (total E-bus current)/4 |
| Current supply E-bus: | 2000 mA |
| Current consumption 24 V DC: | typ. 70 mA |
| Current consumption E-bus: | – |
| Power contacts: | max. 24 V DC/max. 10 A |
| Weight: | approx. 190 g |
| Operating/storage temperature: | -25…+60 °C/-40…+85 °C |
| Relative humidity: | 95 %, no condensation |
| Vibration/shock resistance: | conforms to EN 60068-2-6/EN 60068-2-27 |
| EMC immunity/emission: | conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. class/installation pos.: | IP 20/variable |
| Approvals/markings: | CE, UL, ATEX |
| Ex-Marking: | II 3 G Ex nA IIC T4 Gc |
| ECCN: | |
| Country of Origin: | |
| EAN: | |
| Weight: | 0.00 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |