EJ7041-0052
EJ7041-0052 | Stepper motor module 50 V DC, 5 A
The EJ7041-0052 EtherCAT plug-in module is intended for use with stepper motors in the medium performance range. The PWM output stages cover a wide voltage and current range. Together with two inputs for limit switches, they are integrated in the EtherCAT plug-in module. By setting just a few parameters, the EJ7041-0052 module can be adapted to the individual motor and application at hand. 64-fold microstepping ensures particularly smooth and precise motor operation.
| Technology: | compact Drive Technology |
| Load type: | 2-phase stepper motor (uni-/bipolar) |
| Number of channels: | 1 |
| Number of outputs: | 1 x stepper motor (2 phases) |
| Number of inputs: | 2 x end position |
| Connection method: | direct motor connection |
| Supply voltage electronics: | 24 V DC (via distribution board) |
| Supply voltage power: | 8…50 V DC (via distribution board) |
| Output current: | max. 5.0 A (overload- and short-circuit proof) |
| Step frequency: | 1000, 2000, 4000 or 8000 full steps (configurable) |
| Step pattern: | 64-fold micro stepping |
| Current controller frequency: | approx. 16 kHz |
| Resolution: | approx. 5000 positions in typ. applications (per revolution) |
| Encoder input signal: | – |
| Input frequency: | – |
| Auxiliary power current: | typ. 50 mA |
| Current consumption E-bus: | typ. 140 mA |
| Distributed clocks: | yes |
| Special features: | travel distance control |
| Electrical isolation: | 500 V (E-bus/field potential) |
| Operating/storage temperature: | 0…+55 °C/-25…+85 °C |
| Relative humidity: | 95 %, no condensation |
| EMC immunity/emission: | conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. class/installation pos.: | IP 20/see documentation |
| Approvals/markings: | CE |
| ECCN: | |
| Country of Origin: | |
| EAN: | |
| Weight: | 0.00 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |