View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Seleccione el idioma
Solicitud con 1 clic
Producto
Pepperl+Fuchs
243753
KFD2-SLD-Ex1.13100
Solicitar una oferta
Pepperl+Fuchs 243753
KFD2-SLD-Ex1.13100
Amplificador Separador para electroválvula
Bajo pedido. Envíenos un correo electrónico para consultar el precio y la disponibilidad.
"ucnguBrctvdgcxgt0eqo"
Descripción
Barrera aislada de 1 canal, Alimentación de 24 V CC (carril de alimentación), Entrada lógica, Salida 100 mA con 13 V CC, Salidas alternas para el accionamiento de solenoides con 2 bobinas, Alta potencia de salida para el grupo de gases IIB, Transparencia de fallo de línea (LFT), Inmunidad de pulso de prueba, Hasta SIL 3 según IEC 61508pa
Parámetros técnicos
| Signal type: | Digital Output |
| Safety Integrity Level (SIL): | SIL 3 |
| Connection: | Power Rail or terminals 14+, 15- |
| Rated voltage: | 19 ... 30 V DC loop powered |
| Input current: | 115 mA at 24 V , 130 Ω load |
| Power dissipation: | 1.5 W at 24 V , 130 Ω load |
| Connection side: | control side |
| Connection: | channel 1: terminals 7+, 8- channel 2: terminals 10+, 11- |
| Input current: | approx. 6 mA at 24 V DC |
| Signal level: | 1-signal: 15 ... 30 V DC 0-signal: 0 ... 5 V DC |
| Connection side: | field side |
| Connection: | channel 1: terminals 1+, 2-, 3 channel 2: terminals 4+, 5-, 6- |
| Internal resistor: | approx. 64 Ω |
| Current: | typ. 100 mA |
| Voltage: | ≥ 13 V |
| Current limit: | 105 mA |
| Open loop voltage: | typ. 19.2 V |
| Load: | nominal 0.08 ... 1 kΩ |
| Switching frequency: | max. 2 Hz |
| Energized/De-energized delay: | 30 ms / 30 ms |
| Line fault detection: | signal at short-circuit RB < 30 Ω, lead breakage RB > 10 kΩ , test current < 4 mA pulsing (20 ms On, 200 ms Off) |
| Input/power supply: | basic insulation according to IEC/EN 61010-1, rated insulation voltage 60 Veff |
| Input/input: | basic insulation according to IEC/EN 61010-1, rated insulation voltage 60 Veff |
| Output/Output: | basic insulation according to IEC/EN 61010-1, rated insulation voltage 60 Veff |
| Output/other circuits: | basic insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff |
| Display elements: | LEDs |
| Control elements: | DIP-switch |
| Configuration: | via DIP switches |
| Labeling: | space for labeling at the front |
| Electromagnetic compatibility: Directive 2014/30/EU: | EN 61326-1:2013 (industrial locations) |
| Electromagnetic compatibility: | NE 21:2011 For further information see system description. |
| Degree of protection: | IEC 60529:2001 |
| Protection against electrical shock: | EN 61010-1:2010 |
| Ambient temperature: | -20 ... 60 °C (-4 ... 140 °F) |
| Degree of protection: | IP20 |
| Connection: | screw terminals |
| Mass: | approx. 200 g |
| Dimensions: | 20 x 119 x 115 mm (0.8 x 4.7 x 4.5 inch) , housing type B2 |
| Mounting: | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
| EU-Type Examination Certificate: | EXA 17 ATEX 0076X |
| Electromagnetic compatibility: Marking: | II 3(1)G Ex ec [ia IIB Ga] IIC T4 Gc II (1)D [Ex ia Da] IIIC I (M1) [Ex ia Ma] I |
| Electromagnetic compatibility: Output: | Ex ia |
| Electromagnetic compatibility: Voltage: | 22.2 V |
| Electromagnetic compatibility: Current: | 360 mA |
| Electromagnetic compatibility: Power: | 1990 mW |
| Supply: Maximum safe voltage: | 60 V (Attention! The rated voltage can be lower.) |
| Input: Maximum safe voltage: | 60 V (Attention! The rated voltage can be lower.) |
| Galvanic isolation: Output/Output: | safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 60 V |
| Galvanic isolation: Output/other circuits: | safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V |
| Directive conformity: Directive 2014/34/EU: | EN 60079-0:2012+A11:2013 , EN 60079-7:2015 , EN 60079-11:2012 |
| IECEx approval: | IECEx EXA 17.0019X |
| Directive conformity: Approved for: | Ex ec [ia IIB Ga] IIC T4 Gc , [Ex ia Da] IIIC , [Ex ia Ma] I |
| Supplementary information: | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
| Optional accessories: | - power feed module KFD2-EB2(.R4A.B)(.SP) - universal power rail UPR-03(-M)(-S) - profile rail K-DUCT-BU(-UPR-03) |
Parámetros logísticos
| ECCN: | |
| País de origen: | SG |
| EAN: | |
| Peso: | 0,00 kg |
| Longitud: | 0,00 m |
| Anchura: | 0,00 m |
| Altura: | 0,00 m |