Pepperl+Fuchs 275874

VBA-4A-70MM

AS-Interface stack light module

По запросу. Пожалуйста, отправьте нам письмо, чтобы узнать цену и наличие.
"ucnguBrctvdgcxgt0eqo"

Описание

The signal column module VBA-4A-70MM is an AS-Interface module with 4 virtually wearproof semiconductor relay outputs which can trigger up to 4 stages of a signal column. AS-Interface module for stack lightfa. The connection of the external auxiliary voltage and the AS-Interface takes place via screw terminals in the corresponding connection element which is easily fitted to the module via a bayonet system. The supply of the connected outputs can take place either from the internal power supply of the module (from AS-Interface) or via an external power source. Switching takes place via a sliding switch inside the element. The selection of the external power supply is indicated via an LED (AUX). The outputs are protected against reversal, overload and short circuit. An LED to indicate the AS-Interface voltage is available, another indicates errors in the AS-Interface communication. For parameterization there is an addressing jack in the element protected against external interference.

Технические характеристики

Slave type: A/B slave
AS-Interface specification: V3.0
Required master specification: ≥ V3.0
UL File Number: E223176
MTTFd: 300 a
LED FAULT: communication error / address is 0; LED red
LED AS-i: AS-Interface voltage; LED green
LED AUX: ext. auxiliary voltage UAUX ; LED green
Auxiliary voltage (output): 20 ... 30 V DC PELV
Rated operating voltage: 26.5 ... 31.6 V from AS-Interface
Rated operating current: ≤ 210 mA
Number/Type: 4 semiconductor relay outputs
Supply: from AS-Interface or from external auxiliary voltage as required UAUX
Voltage: 21 ... 31 V
Current: AS-interface: ≤ 200 mA for the stack light UAUX: ≤ 300 mA per light element
Profile: S-7.A.7
IO code: 7
ID code: A
Data bits (function via AS-Interface): input output
: D0: - OUT1
: D1: - OUT2
: D2: - OUT3
: D3: - OUT4
Parameter bits (programmable via AS-i): function
: P0: Communication monitoring P0 = 0 monitoring = off, the outputs maintain the status if communication fails P0 = 1 monitoring = on, i.e. if communication fails, the outputs are deenergised (default settings)
: P1: not used
: P2: not used
: P3: not used
Ambient temperature: -20 ... 50 °C (-4 ... 122 °F)
Degree of protection: IP65
Connection: Bayonet system

Логистические характеристики

ТН ВЭД:
Страна происхождения: DE
EAN:
Вес: 0,00 kg
Длина: 0,00 m
Ширина: 0,00 m
Высота: 0,00 m