263178
INX360D-F99-I2E2-8,5M
Inclination sensor
E1-Type approval, Measuring range 0 .. 360°, Analog output 4 mA ... 20 mA, Evaluation limits can be taught-in, 2 programmable switch outputs, High shock resistance, Increased noise immunity 100 V/mfa
Type: | Inclination sensor, 1-axis |
Measurement range: | 0 ... 360 ° |
Absolute accuracy: | ≤ ± 0.5 ° |
Response delay: | ≤ 20 ms |
Resolution: | ≤ 0.1 ° |
Repeat accuracy: | ≤ ± 0.1 ° |
Temperature influence: | ≤ 0.027 °/K |
MTTFd: | 300 a |
Mission Time (TM): | 20 a |
Diagnostic Coverage (DC): | 0 % |
Operation indicator: | LED, green |
Teach-In indicator: | 2 LEDs yellow (switching status), flashing |
Button: | 2 push-buttons ( Switch points programming , Evaluation range programming ) |
Switching state: | 2 yellow LEDs: Switching status (each output) |
Operating voltage: | 10 ... 30 V DC |
No-load supply current: | ≤ 25 mA |
Time delay before availability: | ≤ 200 ms |
Output type: | 2 switch outputs PNP, NO , reverse polarity protected , short-circuit protected |
Operating current: | ≤ 100 mA |
Voltage drop: | ≤ 3 V |
Output type: | 1 current output 4 ... 20 mA |
Load resistor: | 0 ... 200 Ω at UB = 10 ... 18 V 0 ... 500 Ω at UB = 18 ... 30 V |
Standard conformity: Shock and impact resistance: | 100 g according to DIN EN 60068-2-27 |
Standard conformity: Standards: | EN 60947-5-2:2007 IEC 60947-5-2:2007 |
UL approval: | cULus Listed, Class 2 Power Source |
CCC approval: | CCC approval / marking not required for products rated ≤36 V |
E1 Type approval: | 10R-04 |
Ambient temperature: | -40 ... 85 °C (-40 ... 185 °F) |
Storage temperature: | -40 ... 85 °C (-40 ... 185 °F) |
Connection type: | 8.5 m , PUR cable , 5 x 0.5 mm2 |
Housing material: | PA |
Degree of protection: | IP68 / IP69K |
Mass: | 240 g |
Switching output 1: | -30 ° ... 30 ° |
Switching output 2: | -30 ° ... 30 ° |
Analog output: | -45 ° ... 45 ° |
ТН ВЭД: | |
Страна происхождения: | SG |
EAN: | |
Вес: | 0,00 kg |
Длина: | 0,00 m |
Ширина: | 0,00 m |
Высота: | 0,00 m |