Pepperl+Fuchs 241266

VDM100-150-P/G2

Distance sensor

По запросу. Пожалуйста, отправьте нам письмо, чтобы узнать цену и наличие.
"ucnguBrctvdgcxgt0eqo"

Описание

Distance sensor for positioning tasks accurate to the millimeter, PRT, measuring range up to 150 m, PROFIBUS, M12 plug, Measuring method PRT (Pulse Ranging Technology), Non-contact precision measurement, Ultra-fast data acquisition, Active dynamic control, Modern lightweight design, extremely robustfa. Series VDM 100 laser distance measurement devices are designed for high distances. They have a repeat accuracy of 0.5 mm. SSI and fieldbusses are used as value interfaces. These devices are used for precise positioning of rack operating units, gantry cranes, railbound vehicles, elevators and other linear movable units.

Технические характеристики

Measurement range: 0.3 ... 150 m
Reference target: Foil reflector 500 mm x 500 mm
Light source: laser diode
Laser nominal ratings: Note: VISIBLE AND INVISIBLE LASER RADIATION , DO NOT STARE INTO BEAM
Laser nominal ratings: Laser class: Measurement laser: 1 Alignment laser: 2
Laser nominal ratings: Wave length: Measurement laser: 905 nm Alignment laser: 660 nm
Laser nominal ratings: Beam divergence: Measurement laser: 2 mrad Alignment laser: 1 mrad
Laser nominal ratings: Pulse length: Measurement laser: 4 ns
Laser nominal ratings: Repetition rate: Measurement laser: 20 kHz
Laser nominal ratings: Maximum optical power output: Alignment laser: 0.6 mW
Laser nominal ratings: max. pulse energy: Measurement laser: 12 nJ
Measuring method: Pulse Ranging Technology (PRT)
Max. Motion velocity: 15 m/s
Alignment aid: Laser pointer
Life span: > 100000 h
Diameter of the light spot: < 35 cm at 150 m
Ambient light limit: > 100000 Lux
Resolution: 0.1 mm , adjustable
Temperature influence: 0.03 mm/K
MTTFd: 89 a
Mission Time (TM): 20 a
Diagnostic Coverage (DC): 0 %
Function indicator: 4 LEDs
Control elements: Control panel (4 membrane keys) for setting parameters
Parameterization indicator: Illuminated display for displaying measured values and parameterization
Operating voltage: 18 ... 30 V DC
No-load supply current: 250 mA (18 V) ... 150 mA (30 V)
Protection class: III (operating voltage 50 V)
Time delay before availability: < 10 s
Interface type: PROFIBUS DP acc. to EN 50170
Transfer rate: 9.6 kbit/s ... 12 Mbit/s , adjustable
Input/output type: 2 PNP inputs/outputs, independent configuration, short-circuit protected, reverse polarity protected
Switching threshold: low: Ue < 6 V, high: Ue > 16 V
Switching threshold: low: Ua < 1 V, high: Ua > Ub - 1 V
Switching current: 200 mA per output
Product standard: EN 60947-5-2
Laser safety: IEC 60825-1:2007
Measured value output: 1 ms
Average data age: 3 ms , 6 ms , 12 ms , 25 ms , 50 ms , adjustable
Offset: max. 2 mm (between two devices)
Absolute accuracy: ± 2.5 mm (> 3 m); ± 3.5 mm (0.3 m to 3 m)
Repeat accuracy: < 0.5 mm
UL approval: cULus Listed, Class 2 Power Source, Type 1 enclosure
FDA approval: IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
Ambient temperature: -10 ... 50 °C (14 ... 122 °F)
Storage temperature: -20 ... 70 °C (-4 ... 158 °F)
Relative humidity: 95 % , no moisture condensation
Housing width: 140 mm
Housing height: 100 mm
Degree of protection: IP65
Connection: 4-pin, M12x1 connector, standard (supply) , 5-pin, M12x1 connector, B-coded (Bus In) , 5-pin, M12x1 socket, B-coded (Bus Out) , 8-pin, M12x1 connector, service
Material: Housing: ABS / PC
Material: Optical face: PMMA , hard coated
Mass: approx. 700 g

Логистические характеристики

ТН ВЭД:
Страна происхождения: DE
EAN:
Вес: 0,00 kg
Длина: 0,00 m
Ширина: 0,00 m
Высота: 0,00 m