View this page in: English

Email: "ucnguBrctvdgcxgt0eqo"

Automation / Automation / Automation

Thru-beam sensor

По запросу. Пожалуйста, отправьте нам письмо, чтобы узнать цену и наличие.

"ucnguBrctvdgcxgt0eqo"

REQUEST QUOTE

Thru-beam sensor, Visible red light, Pre-fault indication, Light/dark ON, programmable, Control input for light/dark switchingfa

Emitter:	M13/73c
Receiver:	MV13/32/40b/73c
Effective detection range:	0 ... 15 m
Threshold detection range:	22 m
Adjustment range:	2 ... 22 m
Light source:	LED , 660 nm
Light type:	modulated visible red light
Ambient light limit:	10000 Lux
Operation indicator:	LED green (emitter)
Function indicator:	switching state: LED yellow pre-fault indicator: LED red
Control elements:	sensitivity adjustment
Operating voltage:	10 ... 30 V DC
Ripple:	10 %
No-load supply current:	≤ 25 mA
Time delay before availability:	≤ 30 ms
Control input:	light on +UB dark on: 0 V
Switching type:	light/dark on
Signal output:	1 PNP output, short-circuit protected, reverse polarity protected, open collector
Switching voltage:	max. 30 V DC
Switching current:	max. 200 mA
Voltage drop:	≤ 2.5 V DC
Switching frequency:	≤ 150 Hz
Response time:	≤ 3 ms
Product standard:	EN 60947-5-2
CCC approval:	CCC approval / marking not required for products rated ≤36 V
Ambient temperature:	-25 ... 70 °C (-13 ... 158 °F)
Storage temperature:	-40 ... 70 °C (-40 ... 158 °F)
Housing width:	18 mm
Housing height:	45 mm
Housing depth:	38 mm
Degree of protection:	IP67
Connection:	M12 connector, 4-pin
Material: Housing:	ABS
Material: Optical face:	PMMA
Mass:	40 g (device)

Pepperl+Fuchs 088795

M13/MV13/32/40b/73c