210596
US 30 M 6000 IU-B4
Ultrasonic Sensor
IO-Link. Can be configured as ultrasonic diffuser, ultrasonic barrier or for the analog distance measurement. 3 different teach modes. Scanning range adjustable. Analog output 4 .. 20 mA / 0 .. 10 V, depending on load. Insensitive to dirt. Insensitive to ambient noise. Scanning does not depend on surface. Metal casing with connector M12. Protection class IP 67
| Operating principle: | Retroreflective sensor, Diffuser, Window mode, analog distance measurement, configurable via IO-Link |
| Evaluation: | analog, digital (via IO-Link) |
| Operating modes: | Default, Master/Slave function (synchronization or multiplex mode) |
| Size: | M30 x 1,5 (thread) |
| Design: | screw |
| Sending axis: | axial |
| Nominal switching distance (Sn): | 6000 mm |
| Standardized measuring plate: | 200 x 200 mm |
| Service voltage: | 18 ... 30 V DC |
| No-load current: | < 45 mA, (24 V DC) |
| Operating distance: | 600 ... 6000 mm adjustable |
| Resolution: | 0,02 ... 1,32 mm (analog), 1 mm (IO-Link) |
| Sensitivity adjustment: | Remote teach |
| Mounting distance: | > 1400 mm (Sensor to sensor) |
| Switching output: | Push pull, 100 mA |
| Max. power operating: | 100 mA |
| Switching hysteresis: | 5 ... 50 mm (20 mm preset), via IO-Link adjustable |
| Analog output: | 0 ... 10 V, 4 ... 20 mA |
| Sound frequency: | 80 kHz |
| Linearity analog output: | < 0,5 % / Sn max. |
| Interface: | IO-Link, V1.1, COM2 (38,4kBd), Smart Sensor Profile |
| Inverse polarity protection: | Yes |
| Display: | 2 x LED yellow (Display output), 2 x LED green (status) |
| Voltage drop: | < 2,0 V |
| Switching frequency: | 2 Hz |
| Short-circuit protection: | yes |
| Reproducibility: | 4 mm |
| Readiness delay: | < 300 ms |
| Ambient temperature, operation: | -25 … +70 °C |
| Temperature drift: | 0.2 %/K (uncompensated), < 1.5 %/Sn (compensated) |
| Load resistance: | > 10 KΩ (0 ... 10 V) / < 400 Ω (4 ... 20 mA) |
| Insulation voltage endurance: | 500 V |
| Protection class: | IP 67 |
| Protection degree: | III, operation on protective low voltage |
| Casing material: | brass nickel plated |
| Material: | epoxy resin, PUR (Transducer surface) |
| Connection: | Connector, M12 x 1, 4-poled |
| Scope of delivery: | 2 x M30 nuts |
| ECCN: | |
| Kraj pochodzenia: | |
| EAN: | |
| Waga: | 0,19 kg |
| Długość: | 0,00 m |
| Szerokość: | 0,00 m |
| Wysokość: | 0,00 m |