209588
USB-FBPS-1.11.45.NI
USB Fieldbus Power Supply
USB Fieldbus Power Supply, Output: min. 11 V/45 mA, For 1...2 devices/test setups, In conjunction with NI PCMCIA-FBUS card, Permitted for Zone 2 operation, For FOUNDATION Fieldbus H1pa
| Design / Mounting: | Handheld/mobile |
| Connection: | USB-Male Connector Typ A (Standard) |
| Rated voltage: | typ. 5 V |
| Rated current: | max. 350 mA |
| Power dissipation: | typ. 250 mW |
| Connection: | D-Sub socket 9-pin ; pin 6: Bus + , pin 7: Bus - |
| Rated voltage: | min. 11 V |
| Rated current: | 45 mA |
| Short-circuit current: | typ. 60 mA |
| Terminating resistor: | 50 Ω |
| LED ERR: | red flashing: short-circuit or undervoltage at output |
| LED PWR: | green: Interface Power ON/OK |
| Electromagnetic compatibility: Directive 2014/30/EU: | EN 61326-1:2013 |
| Degree of protection: | IEC/EN 60529 |
| Fieldbus standard: | IEC 61158-2 |
| Ambient temperature: | -10 ... 50 °C (14 ... 122 °F) |
| Storage temperature: | -40 ... 70 °C (-40 ... 158 °F) |
| Pollution degree: | max. 2, according to IEC 60664 |
| Connection type: | USB-Male Connector Typ A (Standard) |
| Housing: | 56 x 32 x 17 mm |
| Housing material: | Polycarbonate |
| Degree of protection: | IP20 |
| Mass: | approx. 105 g |
| Outputs: Voltage: | 17.5 V |
| Certificate: | PF 08 CERT 1303 X |
| Outputs: Marking: | II 3G Ex nA II T4 |
| Directive conformity: Directive 2014/34/EU: | EN 60079-0:2012 , EN 60079-11:2012 , EN 60079-15:2010 |
| Supplementary information: | Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. |
| ECCN: | |
| País de origen: | Deutschland |
| EAN: | 4050143073450 |
| Peso: | 0,11 kg |
| Longitud: | 0,00 m |
| Anchura: | 0,00 m |
| Altura: | 0,00 m |