Pepperl+Fuchs
209588
USB-FBPS-1.11.45.NI
Pepperl+Fuchs 209588
USB-FBPS-1.11.45.NI
USB Fieldbus Power Supply
Opis
USB Fieldbus Power Supply, Output: min. 11 V/45 mA, For 1...2 devices/test setups, In conjunction with NI PCMCIA-FBUS card, Permitted for Zone 2 operation, For FOUNDATION Fieldbus H1pa. The USB-FBPS-1.11.45.NI fieldbus power supply powers one or two field devices. It connects via D-SUB female connector to the popular NI PCMCIA FBUS card by National Instruments. This small unit is designed to enable commissioning and maintenance personnel to conduct single field device work typical during plant start-up or maintenance: device configuration download, functional test, and device tagging. The power supply provides the infrastructure from the convenience of a laptop or PC, or any other USB-port. This device complements the portfolio of FieldConnex, tools for the fieldbus practitioner on the go. It complements the mobile Diagnostic Module DM-AM for check-out, monitoring, and troubleshooting of single fieldbus segments.
Parametry techniczne
| Design / Mounting: | Handheld/mobile |
| Connection: | USB-Male Connector Typ A (Standard) |
| Rated voltage: | typ. 5 V |
| Rated current: | max. 350 mA |
| Power dissipation: | typ. 250 mW |
| Connection: | D-Sub socket 9-pin ; pin 6: Bus + , pin 7: Bus - |
| Rated voltage: | min. 11 V |
| Rated current: | 45 mA |
| Short-circuit current: | typ. 60 mA |
| Terminating resistor: | 50 Ω |
| LED ERR: | red flashing: short-circuit or undervoltage at output |
| LED PWR: | green: Interface Power ON/OK |
| Electromagnetic compatibility: Directive 2014/30/EU: | EN 61326-1:2013 |
| Degree of protection: | IEC/EN 60529 |
| Fieldbus standard: | IEC 61158-2 |
| Ambient temperature: | -10 ... 50 °C (14 ... 122 °F) |
| Storage temperature: | -40 ... 70 °C (-40 ... 158 °F) |
| Pollution degree: | max. 2, according to IEC 60664 |
| Connection type: | USB-Male Connector Typ A (Standard) |
| Housing: | 56 x 32 x 17 mm |
| Housing material: | Polycarbonate |
| Degree of protection: | IP20 |
| Mass: | approx. 105 g |
| Outputs: Voltage: | 17.5 V |
| Certificate: | PF 08 CERT 1303 X |
| Outputs: Marking: | II 3G Ex nA II T4 |
| Directive conformity: Directive 2014/34/EU: | EN 60079-0:2012 , EN 60079-11:2012 , EN 60079-15:2010 |
| Supplementary information: | Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. |
Parametry logistyczne
| ECCN: | |
| Kraj pochodzenia: | Deutschland |
| EAN: | 4050143073450 |
| Waga: | 0,11 kg |
| Długość: | 0,00 m |
| Szerokość: | 0,00 m |
| Wysokość: | 0,00 m |