204715-0011
RD0-FB-Ex4
FieldBarrier®
4 outputs Ex ia IIC, FieldBarrier in Zone 1/Div. 2, Instruments in Zone 0...1/Div. 1, Short circuit current limitation per output, For FOUNDATION Fieldbus H1 and PROFIBUS PApa
| Design / Mounting: | Cabinet installation |
| Main cable (Trunk): Connection: | input (Trunk IN): terminals 3+, 4-, 5s output (Trunk OUT): terminals 7-, 8+, 6s |
| Main cable (Trunk): Rated voltage: | 32 ... 16 V DC |
| Main cable (Trunk): Rated current: | 31 mA ... 26 mA (without load) 77 mA ... 115 mA (at 20 mA load per input) 120 mA ... 209 mA (at 40 mA load per input) 135 mA ... 241 mA (short-circuit on all outputs) |
| Main cable (Trunk): Voltage drop: | trunk IN to trunk OUT 100 mV max. |
| Main cable (Trunk): Number of couplers: | max. 4 per segment |
| Outputs: Number of devices per output: | 1 |
| Outputs: Connection: | output 1: terminals 10+, 11-, 12S shield; output 2: terminals 13+, 14-, 15S shield; output 3: terminals 16+, 17-, 18S shield; output 4: terminals 19+, 20-, 21S shield |
| Outputs: Rated voltage: | 10 ... 13 V |
| Outputs: Rated current: | max. 43 mA |
| Outputs: Short-circuit current: | 50 mA |
| LED voltage Fieldbus: | green: on, bus voltage existent |
| LED status output: | red flashing: short-circuit |
| Main wire/outputs: | isolation is not affected by interference according to EN 50020, voltage peak value 375 V |
| Electromagnetic compatibility: Directive 2014/30/EU: | EN 61326-1:2013 |
| Electromagnetic compatibility: | NE 21:2006 |
| Degree of protection: | IEC/EN 60529 |
| Fieldbus standard: | IEC 61158-2 |
| Climatic conditions: | DIN IEC 721 |
| Corrosion resistance: | acc. to ISA-S71.04-1985, severity level G3 |
| Ambient temperature: | -50 ... 70 °C (-58 ... 158 °F) |
| Storage temperature: | -40 ... 85 °C (-40 ... 185 °F) |
| Connection type: | fixed terminals, plug-in terminals |
| Core cross-section: | up to 2.5 mm2 |
| Housing: | see figure 1 |
| Housing material: | Polycarbonate |
| Electromagnetic compatibility: R... DIN rail housing: | PA 6.6 |
| Degree of protection: | IP20 |
| Mass: | 1050 g |
| Mounting: | mounting on DIN rail in cabinet |
| EU-Type Examination Certificate: | PTB 02 ATEX 2086 |
| Electromagnetic compatibility: Marking: | II 2 (1) G Ex eb mb [ia Ga] IIC T4 Gb , II (1) D [Ex ia Da] IIIC |
| Main cable (Trunk): Maximum safe voltage Um: | 253 V AC |
| Outputs: Power: | 975 mW |
| Outputs: Voltage: | 15.75 V |
| Outputs: Current: | 248 mA |
| Directive conformity: Directive 2014/34/EU: | EN 60079-0:2012 , EN 60079-7:2015 , EN 60079-11:2012 , EN 60079-18:2015 , EN 60079-31:2013 |
| FM approval: | CoC 3015728 |
| Directive conformity: Control drawing: | No. 116-0226 |
| Directive conformity: Approved for: | Class I, Division 2, Groups A, B, C, D / Class I, Zone 2, AEx nA [ia] IIC T4 |
| CSA approval: | CoC 1592754 |
| Directive conformity: Control drawing: | 116-0266 |
| Directive conformity: Approved for: | Class I, Division 2, Groups A, B, C, D / Class I, Zone 2, Ex nA [ia] IIC T4 |
| IECEx approval: | IECEx PTB 03.0003 |
| Directive conformity: Approved for: | Ex eb mb [ia Ga] IIC T4 Gb , [Ex ia Da] IIIC |
| FOUNDATION Fieldbus: | FF-846 |
| Marine approval: | DNV A-14038 |
| Supplementary information: | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. |
| ECCN: | |
| País de origen: | Singapur |
| EAN: | 4050143077793 |
| Peso: | 1,11 kg |
| Longitud: | 0,00 m |
| Anchura: | 0,00 m |
| Altura: | 0,00 m |