Pepperl+Fuchs
204715-0011
RD0-FB-Ex4
Pepperl+Fuchs 204715-0011
RD0-FB-Ex4
FieldBarrier®
Opis
The FieldBarrier, a device coupler for DIN rail mounting, connects 4 instruments with intrinsic safety (Ex ia/Ex ib) and short circuit current limitation at each output. This ensures proper operation of the segment during faults or hot work at the spur. 4 outputs Ex ia IIC, FieldBarrier in Zone 1/Div. 2, Instruments in Zone 0...1/Div. 1, Short circuit current limitation per output, For FOUNDATION Fieldbus H1 and PROFIBUS PApa. High power on the trunk enables maximum cable lengths and device count in any hazardous area. The integrated fieldbus terminator features high-availability design and is selectable. Output terminals with a choice of fixed or plug-in screw terminals connect 1 device each. LEDs simplify troubleshooting and help decrease repair time. Any grounding and shielding concept is possible based on FieldConnex, enclosure solutions.
Parametry techniczne
| Design / Mounting: | Cabinet installation |
| Main cable (Trunk): Connection: | input (Trunk IN): terminals 3+, 4-, 5s output (Trunk OUT): terminals 7-, 8+, 6s |
| Main cable (Trunk): Rated voltage: | 32 ... 16 V DC |
| Main cable (Trunk): Rated current: | 31 mA ... 26 mA (without load) 77 mA ... 115 mA (at 20 mA load per input) 120 mA ... 209 mA (at 40 mA load per input) 135 mA ... 241 mA (short-circuit on all outputs) |
| Main cable (Trunk): Voltage drop: | trunk IN to trunk OUT 100 mV max. |
| Main cable (Trunk): Number of couplers: | max. 4 per segment |
| Outputs: Number of devices per output: | 1 |
| Outputs: Connection: | output 1: terminals 10+, 11-, 12S shield; output 2: terminals 13+, 14-, 15S shield; output 3: terminals 16+, 17-, 18S shield; output 4: terminals 19+, 20-, 21S shield |
| Outputs: Rated voltage: | 10 ... 13 V |
| Outputs: Rated current: | max. 43 mA |
| Outputs: Short-circuit current: | 50 mA |
| LED voltage Fieldbus: | green: on, bus voltage existent |
| LED status output: | red flashing: short-circuit |
| Main wire/outputs: | isolation is not affected by interference according to EN 50020, voltage peak value 375 V |
| Electromagnetic compatibility: Directive 2014/30/EU: | EN 61326-1:2013 |
| Electromagnetic compatibility: | NE 21:2006 |
| Degree of protection: | IEC/EN 60529 |
| Fieldbus standard: | IEC 61158-2 |
| Climatic conditions: | DIN IEC 721 |
| Corrosion resistance: | acc. to ISA-S71.04-1985, severity level G3 |
| Ambient temperature: | -50 ... 70 °C (-58 ... 158 °F) |
| Storage temperature: | -40 ... 85 °C (-40 ... 185 °F) |
| Connection type: | fixed terminals, plug-in terminals |
| Core cross-section: | up to 2.5 mm2 |
| Housing: | see figure 1 |
| Housing material: | Polycarbonate |
| Electromagnetic compatibility: R... DIN rail housing: | PA 6.6 |
| Degree of protection: | IP20 |
| Mass: | 1050 g |
| Mounting: | mounting on DIN rail in cabinet |
| EU-Type Examination Certificate: | PTB 02 ATEX 2086 |
| Electromagnetic compatibility: Marking: | II 2 (1) G Ex eb mb [ia Ga] IIC T4 Gb , II (1) D [Ex ia Da] IIIC |
| Main cable (Trunk): Maximum safe voltage Um: | 253 V AC |
| Outputs: Power: | 975 mW |
| Outputs: Voltage: | 15.75 V |
| Outputs: Current: | 248 mA |
| Directive conformity: Directive 2014/34/EU: | EN 60079-0:2012 , EN 60079-7:2015 , EN 60079-11:2012 , EN 60079-18:2015 , EN 60079-31:2013 |
| FM approval: | CoC 3015728 |
| Directive conformity: Control drawing: | No. 116-0226 |
| Directive conformity: Approved for: | Class I, Division 2, Groups A, B, C, D / Class I, Zone 2, AEx nA [ia] IIC T4 |
| CSA approval: | CoC 1592754 |
| Directive conformity: Control drawing: | 116-0266 |
| Directive conformity: Approved for: | Class I, Division 2, Groups A, B, C, D / Class I, Zone 2, Ex nA [ia] IIC T4 |
| IECEx approval: | IECEx PTB 03.0003 |
| Directive conformity: Approved for: | Ex eb mb [ia Ga] IIC T4 Gb , [Ex ia Da] IIIC |
| FOUNDATION Fieldbus: | FF-846 |
| Marine approval: | DNV A-14038 |
| Supplementary information: | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. |
Parametry logistyczne
| ECCN: | |
| Kraj pochodzenia: | Singapur |
| EAN: | 4050143077793 |
| Waga: | 1,11 kg |
| Długość: | 0,00 m |
| Szerokość: | 0,00 m |
| Wysokość: | 0,00 m |