418086
DK20-2497(/49)
Print mark contrast sensor
Print mark contrast sensor with plastic lens, 9.5 mm detection range, RGB light, light/dark on, external Teach-in, NPN output, PNP output, M12 plug, Diffuse mode sensor for recording any print mark, Static TEACH-IN: automatic switching threshold adaptation, 30 µs response time, suitable for extremely rapid scanning processes, 3 emitter colors: green, red and bluefa
| Sensor range: | 9.5 mm ± 3 mm |
| Light source: | LED |
| Light type: | Visible green/red/blue, modulated light |
| Light spot representation: | rectangular 1 mm x 4 mm , |
| Angle deviation: | max. ± 3° |
| Ambient light limit: Continuous light: | 7000 Lux |
| Teach-In: | static Teach-In |
| MTTFd: | 650 a |
| Mission Time (TM): | 20 a |
| Diagnostic Coverage (DC): | 0 % |
| Function indicator: | LED yellow; switching operation: lights up if print mark is detected Teach-In operation: flashing slowly alarm display: flashing quickly, if no safe operation is possible |
| Control elements: | Teach-In key |
| Operating voltage: | 10 ... 30 V DC |
| Ripple: | 10 % |
| No-load supply current: | ≤ 70 mA |
| Function input: | Teach-In input |
| Switching type: | light/dark on switchable, results from the order of the Teach-In |
| Signal output: | 1 PNP and 1 NPN short-circuit protected, open collector, synchronized-switching |
| Switching voltage: | PNP: ≥ (+UB -2.5 V) , NPN: ≤ 1.5 V |
| Switching current: | max. 200 mA |
| Switching frequency: | 16.5 kHz |
| Response time: | 30 µs |
| Product standard: | EN 60947-5-2 |
| Standard conformity: Shock and impact resistance: | IEC / EN 60068. half-sine, 40 g in each X, Y and Z directions |
| Standard conformity: Vibration resistance: | IEC / EN 60068-2-6. Sinus. 10 -150 Hz, 5 g in each X, Y and Z directions |
| UL approval: | cULus Listed , Class 2 power source |
| CCC approval: | CCC approval / marking not required for products rated ≤36 V |
| Ambient temperature: | -20 ... 60 °C (-4 ... 140 °F) |
| Storage temperature: | -20 ... 75 °C (-4 ... 167 °F) |
| Housing width: | 33 mm |
| Housing height: | 85.6 mm |
| Housing depth: | 60.8 mm |
| Degree of protection: | IP67 |
| Connection: | 5-pin, M12 x 1 connector |
| Material: Housing: | PC (glass-fiber-reinforced Makrolon) |
| Material: Optical face: | plastic |
| Mass: | 200 g |
| ТН ВЭД: | |
| Страна происхождения: | SG |
| EAN: | |
| Вес: | 0,00 kg |
| Длина: | 0,00 m |
| Ширина: | 0,00 m |
| Высота: | 0,00 m |