Pepperl+Fuchs 267075-100036

OBR12M-R101-EP-IO-V3-L

Laser retroreflective sensor

По запросу. Пожалуйста, отправьте нам письмо, чтобы узнать цену и наличие.
"ucnguBrctvdgcxgt0eqo"

Описание

The miniature optical sensors are the first devices of their kind to offer an end-to- end solution in a small single standard design — from thru-beam sensor through to a distance measurement device. As a result of this design, the sensors are able to perform practically all standard automation tasks. Laser retroreflective sensor, Miniature design with versatile mounting options, DuraBeam Laser Sensors - durable and employable like an LED, Extended temperature range. 40°C ... 60°C, High degree of protection IP69K, IO-link interface for service and process datafa. The DuraBeam laser sensors are durable and can be used in the same way as a standard sensor. The use of Multi Pixel Technology gives the standard sensors a high level of flexibility and enables them to adapt more effectively to their operating environment.

Технические характеристики

Effective detection range: 0 ... 12 m
Reflector distance: 0.2 ... 12 m
Threshold detection range: 15 m
Reference target: H50 reflector
Light source: laser diode
Light type: modulated visible red light
Polarization filter: yes
Laser nominal ratings: Note: LASER LIGHT , DO NOT STARE INTO BEAM
Laser nominal ratings: Laser class: 1
Laser nominal ratings: Wave length: 680 nm
Laser nominal ratings: Beam divergence: > 5 mrad d63 < 2 mm in the range of 250 mm ... 750 mm
Laser nominal ratings: Pulse length: 1.6 µs
Laser nominal ratings: Repetition rate: max. 17.6 kHz
Laser nominal ratings: max. pulse energy: 9.6 nJ
Diameter of the light spot: approx. 30 mm at a distance of 12 m
Angle of divergence: approx. 0.3 °
Ambient light limit: EN 60947-5-2
MTTFd: 672 a
Mission Time (TM): 20 a
Diagnostic Coverage (DC): 0 %
Operation indicator: LED green: constantly on - power on flashing (4Hz) - short circuit flashing with short break (1 Hz) - IO-Link mode
Function indicator: Yellow LED: Permanently lit - light path clear Permanently off - object detected Flashing (4 Hz) - insufficient operating reserve
Control elements: Light-on/dark-on changeover switch
Control elements: sensitivity adjustment
Parameterization indicator: IO link communication: green LED goes out briefly (1 Hz)
Operating voltage: 10 ... 30 V DC
Ripple: max. 10 %
No-load supply current: < 20 mA at 24 V supply voltage
Protection class: III
Interface type: IO-Link ( via C/Q = pin 4 )
Transfer rate: COM 2 (38.4 kBaud)
IO-Link Revision: 1.1
Min. cycle time: 2.3 ms
Process data width: Process data input 2 Bit Process data output 2 Bit
SIO mode support: yes
Device ID: 0x110202 (1114626)
Compatible master port type: A
Switching type: The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally open / dark-on, PNP normally closed / light-on, IO-Link
Signal output: 1 push-pull (4 in 1) output, short-circuit protected, reverse polarity protected, overvoltage protected
Switching voltage: max. 30 V DC
Switching current: max. 100 mA , resistive load
Usage category: DC-12 and DC-13
Voltage drop: ≤ 1.5 V DC
Switching frequency: 2000 Hz
Response time: 250 µs
Communication interface: IEC 61131-9
Product standard: EN 60947-5-2
Laser safety: EN 60825-1:2014
UL approval: E87056 , cULus Listed , class 2 power supply , type rating 1
FDA approval: IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
Ambient temperature: -40 ... 60 °C (-40 ... 140 °F)
Storage temperature: -40 ... 70 °C (-40 ... 158 °F)
Housing width: 13.9 mm
Housing height: 41.4 mm
Housing depth: 18.3 mm
Degree of protection: IP67 / IP69 / IP69K
Connection: M8 x 1 connector, 3-pin
Material: Housing: PC (Polycarbonate)
Material: Optical face: PMMA
Mass: approx. 10 g

Логистические характеристики

ТН ВЭД:
Страна происхождения: SG
EAN:
Вес: 0,00 kg
Длина: 0,00 m
Ширина: 0,00 m
Высота: 0,00 m