Pepperl+Fuchs
233600
HiC2853R2
Pepperl+Fuchs 233600
HiC2853R2
Switch Amplifier
Описание
This isolated barrier is used for intrinsic safety applications. 1-channel isolated barrier, 24 V DC supply (bus powered), Input for approved dry contacts or SN/S1N sensors, Application-specific outputs, Active voltage output, Passive transistor output (resistive), Line fault transparency (LFT), Up to SIL 3 acc. to IEC 61508pa. The device transfers digital signals (SN/S1N proximity sensors or approved dry contacts) from a hazardous area to a safe area. The input controls one 24 V DC active voltage output and one passive transistor output with a resistive output characteristic. The passive transistor output has three defined states: 1-Signal = 5 kΩ, 0-Signal = 15 kΩ and fault > 100 kΩ. Lead breakage (LB) and short circuit (SC) conditions of the control circuit are continuously monitored. Unlike a SN/S1N series safety sensor, an approved dry contact requires a 10 kΩ resistor to be placed across the contact in addition to a 1.5 kΩ resistor in series. This device mounts on a HiC termination board.
Технические характеристики
| Signal type: | Digital Input |
| Safety Integrity Level (SIL): | SIL 3 |
| Connection: | SL1: 1a(-), 1b(-); 2a(+), 2b(+) |
| Rated voltage: | 19 ... 30 V DC bus powered via Termination Board |
| Ripple: | ≤ 10 % |
| Rated current: | ≤ 55 mA |
| Power dissipation: | ≤ 800 mW |
| Power consumption: | ≤ 1300 mW |
| Connection side: | field side |
| Connection: | SL2: 5a(+), 5b(-) |
| Open circuit voltage/short-circuit current: | approx. 8.4 V DC / approx. 11.7 mA |
| Lead resistance: | max. 50 Ω , consider capacitances and inductances |
| Switching point: | 1-signal: I > 2.8 mA 0-signal: I < 2.1 mA |
| Response delay: | ≤ 1 ms |
| Connection side: | control side |
| Connection: | SL1: 8a(+), 7a(-); 10a(+), 9a(-) |
| Rated voltage: | output I: 19 ... 30 V DC |
| Output I: | passive transistor output (resistive) 0-signal: 15 kΩ ± 5 % 1-signal: 5 kΩ ± 5 % fault: > 100 kΩ |
| Output II: | active voltage output, short-circuit proof 0-signal: 0 V 1-signal: 20 ... 31 V DC at max. 15 mA fault: 0 V |
| Connection: | SL1: 6b |
| Output type: | open collector transistor (internal fault bus) |
| Switching frequency: Output I: | ≤ 50 Hz |
| Switching frequency: Output II: | ≤ 50 Hz |
| Output/power supply: | functional insulation acc. to IEC 62103, rated insulation voltage 50 Veff |
| Output/Output: | functional insulation acc. to IEC 62103, rated insulation voltage 50 Veff |
| Display elements: | LEDs |
| Labeling: | space for labeling at the front |
| Electromagnetic compatibility: Directive 2014/30/EU: | EN 61326-1:2013 (industrial locations) |
| Electromagnetic compatibility: | NE 21:2006 For further information see system description. |
| Degree of protection: | IEC 60529:2001 |
| Ambient temperature: | -20 ... 60 °C (-4 ... 140 °F) |
| Degree of protection: | IP20 |
| Mass: | approx. 180 g |
| Dimensions: | 12.5 x 128 x 106 mm (0.5 x 5.1 x 4.2 inch) |
| Mounting: | on Termination Board |
| Coding: | pin 1 and 2 trimmed For further information see system description. |
| EU-Type Examination Certificate: | BASEEFA 07 ATEX 0302X |
| Electromagnetic compatibility: Marking: | II (1)G [Ex ia] IIC , II (1) D [Ex ia] IIIC , I (M1) [Ex ia] I |
| Electromagnetic compatibility: Input: | Ex ia |
| Electromagnetic compatibility: Voltage: | 10.5 V |
| Electromagnetic compatibility: Current: | 17.1 mA |
| Electromagnetic compatibility: Power: | 45 mW (linear characteristic) |
| Supply: Maximum safe voltage: | 253 V AC (Attention! Um is no rated voltage.) |
| Output: Maximum safe voltage: | 253 V AC (Attention! Um is no rated voltage.) |
| Certificate: | PF 09 CERT 1440 X |
| Output: Marking: | II 3G Ex nA IIC T4 Gc |
| Galvanic isolation: Input/Output: | safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V |
| Galvanic isolation: Input/power supply: | safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V |
| Directive conformity: Directive 2014/34/EU: | EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-15:2010 |
| UL approval: Control drawing: | 116-0364 |
| IECEx approval: | IECEx BAS 07.0097X |
| UL approval: Approved for: | [Ex ia Ga] IIC, [Ex ia] I , [Ex ia] IIIC |
| Supplementary information: | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
Логистические характеристики
| ТН ВЭД: | |
| Страна происхождения: | SG |
| EAN: | |
| Вес: | 0,00 kg |
| Длина: | 0,00 m |
| Ширина: | 0,00 m |
| Высота: | 0,00 m |